[TenTec] TT 238C will not tune

[denton sprague]

well an update…TT tested the 238C at full legal limit and it got a clean bill of health…so its something on my end. I will try it again when it gets back, with new cables and see what happens.
On Jul 8, 2013, at 6:27 AM, denton sprague <denton at oregontrail.net> wrote:

> called TT…off it goes to the hospital...
> On Jul 6, 2013, at 10:27 AM, denton sprague <denton at oregontrail.net> wrote:
> 
>> Hi all…
>> I recently purchased a used TT 238C tuner from TT and other than functioning correctly in the bandpass position, it will not tune my antenna system at all!
>> I pulled the cover and can find nothing amiss…
>> It acts like the roller inductor is not in the system and the padding caps on the high z/low z switch are all not correct value.
>> Visually it all looks pretty much like new on the inside.
>> Will call Stan at TT early monday am and see what he says…good thing they warrant their equipment.
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>