[TenTec] which balun?

[Rick - DJ0IP / NJ0IP]

Good choice, Troy.  That is an excellent balun.  But you can build your own
for much less.
Part of the beauty (and high cost) of the Balun Design baluns is their
excellent enclosure and weather-proofing.
This is necessary when the balun is at the antenna.

But if the balun is inside the house, on the back of the Model 238, you
don't need that.  It is wasted money.  Build your own balun.

73
Rick, DJ0IP

-----Original Message-----
From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of TroyW6HV
Sent: Saturday, July 27, 2013 6:00 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] which balun?

I am using the Balun Designs 1:1 current balun model # 1171. Before that,
used  homebrew  that were either 4:1 or 1:1.

Troy, W6HV
      


-----Original Message----- 
From: denton sprague 
Sent: Saturday, July 27, 2013 7:59 AM 
To: Discussion of Ten-Tec Equipment 
Subject: [TenTec] which balun? 

Thought would start a little poll..
Which balun are you using with your 238 series TT tuners and multi band
antenna?
Currently, I use a balun designs 4214t 4:1 balun to feed my 80 meter
horizontal loop.with 450 ohm feeders.
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec