[TenTec] Omni 6 Plus Distorted Audio

[Mike Bryce]

Damn, that's odd. 

With the tests you did it sure points to a fault in the pa. 

I'd put a scope on the +13 vcc line and see if rf is getting on that line. 

Check grounds!!

It's possible that one of the driver/pa transistors is behaving oddly. That would explain the problem at low drive levels. 

Could be a cracked pcb trace inside the pa box. 

Did you look at the output on a scope? 

Mike wb8vge 

Sent from my iPhone

On Jun 20, 2013, at 1:23 PM, Mike <mike at n1mb.com> wrote:

>