[TenTec] N1MM Help

[Robert Mcgraw]

On the Windows computer to find the port in use, go to Control Panel,
then System, then Device Manager.  Scroll down, expand the list, and you
will see the port assignments.  Make note of these.

Also note that on subsequent power up and connections the assigned port
may change depending on what's been connected and disconnected.  If so,
you may need to change the port assignment in the N1MM logger.

You must have the radio on, N1MM software loaded, and radio connected to
the computer.


73
Bob, K4TAX


> Also, look here...
>
> <http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios&structure=N1MM
> +Logger+Documentation#Orion>
>
> 73, Ted W4NZ
>
>
> -----Original Message-----
> From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of Barry
> N1EU
> Sent: Monday, June 24, 2013 2:35 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] N1MM Help
>
> If you choose "Orion" in the Config-Ports menu for the COM port that you
> are
> using, it will show you the suggested settings that will work with the
> Orion.  The trickiest part is figuring out which COM port your cable is
> connected to.
>
> 73, Barry N1EU
>
> On Mon, Jun 24, 2013 at 6:11 PM, Scott Weiss <s.weiss018 at gmail.com>
> wrote:
>
>>  To all,
>>   Could someone please help me with hooking up N1MM to my Orion I. I'm
>> having a tremendous brain fart with this.
>>
>>          Scott
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


-- 
Disclosure:
I am a Tentec Ambassador and compensated according to the Tentec
Ambassador plan. I serve as a volunteer beta test person for the Omni
VII, Eagle and Argonaut VI products.   Otherwise, I hold no business or
employment interest with Tentec.