[TenTec] Computer Headset Secured -- Now What?

[Richards]

On 3/28/2013 4:44 PM, Jim Brown wrote:

> Do NOT worry about excessive gain as long as you can turn down the mic
> gain on the rig enough to get the same level of modulation and
> processing as with your other mic(s).  Then, get critical reports on
> your signal quality from someone whose ears you trust.

> If it ain't broke, don't fix it!

_____________________________________________________________


	I agree.   on my Omni VII, my Shure and Sennheiser
	headsets were so hot, I had to turn the MIC GAIN
	down to 2-3%  and at that point the microphone was
	either on or off, with little adjustment latitude,
	and the AGC was on full blast full time.

	As JB says, if it does not get that crowded on
	your rig, with your headset, and you still have
	latitude to adjust it, then you may not have quite
	the same issue as I did.  As he suggests - don't fix
	more than the problems you actually have.


Just MY take.

---------------------  K8JHR  --------------------------