[TenTec] [ten_tec_radio_net] orion 565 no main receive

[leen3lpj]

Well the radio fixed itself . It's working fine . Maybe the master resets did fix it and I missed it . I don't know . Anyway thanks Fellas .  Lee
  ----- Original Message ----- 
  From: leen3lpj 
  To: ten_tec_radio_net at yahoogroups.com 
  Sent: Monday, October 14, 2013 8:21 PM
  Subject: Re: [ten_tec_radio_net] orion 565 no main receive


    

  Thanks for the reply Ed . No I only had 1 noise blanker on . to listen to it It's like I just unpluged the coax , everything is on but it isn't receiving anything .
      Lee
    ----- Original Message ----- 
    From: Ed Pflueger 
    To: ten_tec_radio_net at yahoogroups.com 
    Sent: Sunday, October 13, 2013 9:29 PM
    Subject: RE: [ten_tec_radio_net] orion 565 no main receive


      

    Were you running both Noise Blanker's on the main receiver and SAF or notch engaged when you powered down?  Power back up, shut off one of the noise blanker's and see if you get her back.


    Ed..AB4IQ


    From: ten_tec_radio_net at yahoogroups.com [mailto:ten_tec_radio_net at yahoogroups.com] On Behalf Of leen3lpj
    Sent: Sunday, October 13, 2013 7:55 PM
    To: ten_tec_radio_net at yahoogroups.com
    Subject: [ten_tec_radio_net] orion 565 no main receive


      

    Hi Fellas,

            I just got done using the radio for the Pa-QSO contest and the main receiver stopped receiving or transmitting . The sub-receiver still works fine . It didn't overheat from alot of use .

            I did a master-reset but it's still the same . It's running the 3.032 version not that that should matter .    

            Any suggestions would be helpful .

                                                                Lee  N3LPJ




  __._,_.___Reply via web post  Reply to sender  Reply to group  Start a New Topic  Messages in this topic (3)  

  Recent Activity: a.. New Members 1 
  Visit Your Group 
   Switch to: Text-Only, Daily Digest . Unsubscribe . Terms of Use . Send us Feedback .
   
  __,_._,___