[TenTec] Paragon II LSB/USB audio differences.

[Bob McGraw - K4TAX]

Could be that the Passband tuning is not correctly aligned as well.  This 
will make one sideband sound different from the other one.

A useful and quick check is to tune in WWV at 10 MHz in USB and then switch 
to LSB.  Adjust the VFO so there is no hetrodyne when changing between USB 
and LSB modes.  Then adjust the PBT to get the ticks and tone and voice 
annoucements to sound the same.  If the radio is not on frequency per the 
display and the PBT is not centered, likely a detailed alignment is in 
order.

73
Bob, K4TAX


----- Original Message ----- 
From: "Peter Bertini" <radioconnection at gmail.com>
To: <tentec at contesting.com>
Sent: Thursday, April 17, 2014 11:56 AM
Subject: Re: [TenTec] Paragon II LSB/USB audio differences.


> Which trimmer are you adjusting for LSB @ 9.003 MHz? I.
>
> Pete
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>