[TenTec] OMNI VI question

[Clayton Brantley via TenTec]

Brandon:  I have a set of boards from a 563 rev 3 that I bought a few years ago.  I now have a
564 that I use here.   Your 563 needs the eproms on the logic board along with the 9 mhz and
6 mhz if boards.  The pushbuttons on the front panel need to be changed.  Look at both of
your radios for the layout.  If you want to "convert" your 563, then we can talk about what you 
will need to make it work.

73 Clayton N4EV


On Monday, August 4, 2014 9:49 PM, K4KJC Mike Ballenger via TenTec <tentec at contesting.com> wrote:
 


Test
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec