[TenTec] OMNI VI question

[Clayton Brantley via TenTec]

Ralph:  The Paragon is a different animal from the OmnI Vi and I'm not familiar with it.
I'm sure there are guys here that can get you going with it.  From what I have heard, 
the Paragon is general coverage where the Omni is ham band only.  They do look
a lot alike but I cannot help you there.

73 Clayton N4EV


On Monday, August 4, 2014 11:40 PM, Ralph Arnold <rea.papaof10 at gmail.com> wrote:
 


Hi Clayton I'm a new Ham    I too bought a Paragon transceiver that was
suppose to be opt 3, but what I received was a bare Paragon With no
1800hz,SSB, 500,or 250 CW filters.  And the Guy promised me they were in
their along with the Ghiel chip.  Any way those spare boards you have will
fit my TT Paragon 585 so maybe I can work out some kind of deal cash or
trade so I can fill the  empty slots  I'm an old   US NAVY  Avionics
Tech--Thank You for listening  ----73 KD8BQ


On Mon, Aug 4, 2014 at 9:58 PM, Clayton Brantley via TenTec <
tentec at contesting.com> wrote:

> Brandon:  I have a set of boards from a 563 rev 3 that I bought a few
> years ago.  I now have a
> 564 that I use here.   Your 563 needs the eproms on the logic board along
> with the 9 mhz and
> 6 mhz if boards.  The pushbuttons on the front panel need to be changed.
>  Look at both of
> your radios for the layout.  If you want to "convert" your 563, then we
> can talk about what you
> will need to make it work.
>
> 73 Clayton N4EV
>
>
> On Monday, August 4, 2014 9:49 PM, K4KJC Mike Ballenger via TenTec <
> tentec at contesting.com> wrote:
>
>
>
> Test
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

>
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec