[TenTec] Omni VI+ problems

[cegtv1--- via TenTec]

I USE A PRODUCT CALLED  ( DEOXIT)  BY CAIG LABS YOU CAN GET IT AT MUSIC SHOPS OR ONLINE RADIO SHACK DOES HAVE IT ALSO ABOUT $15-18  a can but it is the best belive me when I tell you !
 
 
-----Original Message-----
From: Bob McGraw - K4TAX <RMcGraw at Blomand.net>
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Sent: Thu, Aug 14, 2014 2:12 pm
Subject: Re: [TenTec] Omni VI+  problems


I would proceed and unplug each connector, one at a time.  Apply a very 
small amount of contact cleaner to the female part.   Then using a Q-Tip 
with again a very small amount of contact cleaner wetting the Q-Tip, wipe 
each of the male pins.  Then plug that connector back in and remove another, 
following the same process, for each one.

I bet you'll be surprised and it will perform like a new radio.

73
Bob, K4TAX

.


----- Original Message ----- 
From: "John Farler" <k4avx1 at windstream.net>
To: <tentec at contesting.com>; <service at tentec.com>
Sent: Thursday, August 14, 2014 12:12 PM
Subject: [TenTec] Omni VI+ problems


> My Omni VI+ has gone off to lala land.  It suddently stopped
> receiving, and I turned it off.  Turning it back on made it do
> one of two or three things:
> Just one light came on the lock light.
> or all the lights around the tuning knob light up.
> or lights on one side of the tuning knob light.
>
> The main frequency displayand associated indicators
> does not light.
>
> Unless it's just a connector problem, it's back to
> the mother ship.  Any suggestions?
>
> John, K4AVX
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 



_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec