[TenTec] Jupiter If output

[Carl Moreschi]

The IF output on the Jupiter is useless for a panadapter. The first IF 
is 45 mhz, the second is 455 khz but very narrow.

The way to do a panadapter with the Jupiter is to do the N4PY receive 
antenna mod which brings the receive antenna path out to the spare jack. 
  You then hook this up to a panadapter radio such as the Softrock 
Ensemble II (only $92).  My n4py Pegasus Plus will then control both 
radios and keep them both on the same frequency.  This works very well.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 12/5/2014 4:00 PM, Basilie Actipis via TenTec wrote:
>   Can someone tell me what frequency is the If output at????????
> I bought a green display one and it has the If output mod done so I
> would like to hook up a pan display.
> Thank you,
> Bill / N1ASS,73........
>
>   From: "tentec-request at contesting.com"<tentec-request at contesting.com>
> To: tentec at contesting.com
> Sent: Wednesday, December 3, 2014 12:00 PM
> Subject: TenTec Digest, Vol 144, Issue 3
>
>
> Send TenTec mailing list submissions to
>      tentec at contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>      http://lists.contesting.com/mailman/listinfo/tentec
> or, via email, send a message with subject or body 'help' to
>      tentec-request at contesting.com
>
> You can reach the person managing the list at
>      tentec-owner at contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TenTec digest..."
>
>
> Today's Topics:
>
>     1. I'm impressed (art N4UC)
>     2. RX-320 Manual and Schema (Richards)
>     3. Re: I'm impressed (Richards)
>     4. Model 715 Manual (Richards)
>     5. Re: Model 715 Manual (Tony)
>     6. Re: Model 715 Manual (Richards)
>     7. Re: Model 715 Manual (Tony)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 2 Dec 2014 20:57:31 -0600
> From: art N4UC<n4uc at hotmail.com>
> To: TenTec reflector<tentec at contesting.com>
> Subject: [TenTec] I'm impressed
> Message-ID:<BLU171-W3869B6514CC59F6198775E837B0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I shipped my Orion to TenTec via UPS Ground yesterday. It was picked up at 4:30 Central time here in Huntsville, and was signed for at TT this afternoon at 1:57 pm Eastern time, 20 hours later. Assuming it arrived in one piece, I'll have to say I'm moderately impressed for that kind of service for which I paid only $27.49!
>
> Art/N4UC
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 03 Dec 2014 00:51:05 -0500
> From: Richards<jrichards at k8jhr.com>
> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
> Subject: [TenTec] RX-320 Manual and Schema
> Message-ID:<547EA4C9.4040608 at k8jhr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> I will mail an original user manual and set of schematics for the RX-320
> to the first guy who wants them - better someone use them than toss them
> out in "Spring Cleaning."
>
> Just ask and you shall receive promptly.
>
> Happy days.
> ------------------------- K8JHR  --------------------------
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 03 Dec 2014 01:28:58 -0500
> From: Richards<jrichards at k8jhr.com>
> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
> Subject: Re: [TenTec] I'm impressed
> Message-ID:<547EADAA.2070708 at k8jhr.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Way cool.   You are fairly close to TT HQ -- in contrast, it cost me
> closer to $40 to ship an Omni VII from Michigan there.   I am glad you
> don't have to pay as much!
>
> I shipped my Centurion and tubes to TT HQ a month ago, and it cost over
> $70 !  Ouch.  The repair bill was ... er... um...[hard swallow]
> reasonable... but expensive to ship and fix.
>
>
> Turn-around was reasonable, not quite three weeks, but ... oops,... they
> forgot to return my tubes with the rig, so I waited several more days
> for them to arrive.  The repair seems right, but they missed replacing
> one of the case screws.  These are both things that can happen in any
> human operation, and TT was super apologetic about it - and promptly
> shipped the tubes once cued about it.   So, I am feeling OK about the
> experience.  Not a bad result considering the recent move to new digs.
> I am SURE they are still trying to settle in and get everything
> organized.   I recently re-organized my shack, and that took me several
> days to complete, so I can imagine how complicated and time-consuming
> moving an entire business is - especially if you are trying to keep it
> open at the same time.
>
> Happy days, Art.   I hope your repair is quick and cheap.
>
> --------------------------- K8JHR ----------------------------------
>
>
> On 12/2/2014 9:57 PM, art N4UC wrote:
>> I shipped my Orion to TenTec via UPS Ground yesterday.   [and] paid only $27.49!
>>
>
> ________________________________________________
>
>
>
> /
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 03 Dec 2014 01:40:10 -0500
> From: Richards<jrichards at k8jhr.com>
> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
> Subject: [TenTec] Model 715 Manual
> Message-ID:<547EB04A.30305 at k8jhr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I will mail an original TT Model 715 speech processor manual to the
> first guy who want it.  "Spring" cleaning... better someone use it than
> I toss it out.
>
> Happy days.
>
> -------------------  K8JHR  ----------------
>
>
> .
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 03 Dec 2014 02:18:36 -0500
> From: Tony<va3dwi at gmail.com>
> To: tentec at contesting.com
> Subject: Re: [TenTec] Model 715 Manual
> Message-ID:<20141203071836.6033553.75160.16207 at gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Richard,
>
> If that is the original manual for the speech processor I bought from you, you can send it to me as it came with none. I am good in QRZ.com
>
> 73, Tony VE3DWI.
>
> Sent from my BlackBerry 10 smartphone on the Bell network.
> ? Original Message ?
> From: Richards
> Sent: Wednesday, December 3, 2014 01:40
> To: Discussion of Ten-Tec Equipment
> Reply To: Discussion of Ten-Tec Equipment
> Subject: [TenTec] Model 715 Manual
>
> I will mail an original TT Model 715 speech processor manual to the
> first guy who want it. "Spring" cleaning... better someone use it than
> I toss it out.
>
> Happy days.
>
> ------------------- K8JHR ----------------
>
>
> .
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 03 Dec 2014 02:59:00 -0500
> From: Richards<jrichards at k8jhr.com>
> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
> Subject: Re: [TenTec] Model 715 Manual
> Message-ID:<547EC2C4.7020208 at k8jhr.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Oh dear, how embarrassing.   I had no idea...  sorry.
>
> It is packaged up and ready to mail in the morning.
>
> Happy days, OM
>
> ----------------------  K8JHR  -------------------------------------
>
>
> On 12/3/2014 2:18 AM, Tony wrote:
>> Richard,
>>
>> If that is the original manual for the speech processor I bought from you, you can send it to me as it came with none. I am good in QRZ.com
>>
>>
> _______________________________________________
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 03 Dec 2014 11:05:58 -0500
> From: Tony<va3dwi at gmail.com>
> To: tentec at contesting.com
> Subject: Re: [TenTec] Model 715 Manual
> Message-ID:<20141203160558.6033553.15736.16212 at gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> No problem Richard. Thank you
>
> 73, Tony VE3DWI.
>
> Sent from my BlackBerry 10 smartphone on the Bell network.
> ? Original Message ?
> From: Richards
> Sent: Wednesday, December 3, 2014 02:59
> To: Discussion of Ten-Tec Equipment
> Reply To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Model 715 Manual
>
> Oh dear, how embarrassing. I had no idea... sorry.
>
> It is packaged up and ready to mail in the morning.
>
> Happy days, OM
>
> ---------------------- K8JHR -------------------------------------
>
>
> On 12/3/2014 2:18 AM, Tony wrote:
>> Richard,
>>
>> If that is the original manual for the speech processor I bought from you, you can send it to me as it came with none. I am good in QRZ.com
>>
>>
> _______________________________________________
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ------------------------------
>
> End of TenTec Digest, Vol 144, Issue 3
> **************************************
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>