[TenTec] JT65 and JT9

[Bill Engel K5DHY]

John,

Yes, that is the way that I do it.  I have USER1 set for SSB/CW and 
USER2 for digital.  It takes about 20 seconds for the rig to switch 
between the two.

Bill Engel K5DHY


> I need some help priming my feeble brain! :-{ I have become interested in
> trying JT65 and JT9 modes. I have the WSJT-X software and have been able to
> copy well with both modes. I have even gotten brave enough to try to get the
> VOX keying mode to work. But I find it means changing a lot of settings. I
> have to set the trip and antivox levels to the minimum and also want to set
> the audio out on the AUX connector to just "left" vs. "Both." I have never
> used the USER settings. Is this a good example of USER 1 being normal and
> USER 2 being "DIGITAL"? Looking at the manual, it seems to indicate that is
> what should happen, but does anyone have experience that will confirm my
> thoughts? I also want to control the power level and drive settings.
>
> Thanks and 73,
> John
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> ------------------------------
>
> End of TenTec Digest, Vol 134, Issue 13
> ***************************************
>