[TenTec] Omnii 6 PLL board

[Barry N1EU]

Ernie, the PLL boards are almost identical in the Omni V and Omni VI+.
 Here are the alignment instructions for the Omni V:
http://www.tentecwiki.org/doku.php?id=562pllalign

The Omni V manual/schematics are still available on the tentec.com site for
download if you need them.

73, Barry N1EU


On Sat, Jan 11, 2014 at 3:36 PM, Ernie Popp <k2ep at nycap.rr.com> wrote:

> On all bands.  I had the 30m problem with mine.  Fix it just as you said.
> On this one if you tune to a  to a birdie you can hear the frequency shift
> around. John (N1JP) checked it and said 5 MHz is drifting like the PLL is
> not locking in.  He contacted Ten Tec and they said they would sand him
> what they had as far as alignment info.
> We will see.
>
> 73,  Ernie
> ----- Original Message ----- From: "Bill Cotter" <n4lg at qx.net>
>
> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
> Sent: Saturday, January 11, 2014 2:16 PM
>
> Subject: Re: [TenTec] Omnii 6 PLL board
>
>
>  Is the chirp on one band or all? I have found a chirp on 10.1mHz, and the
>> cause was a PLL cap (band 30M) needing to be re-centered.
>>
>> 73 Bill N4LG
>>
>>
>> At 08:29 PM 1/6/2014, you wrote:
>>
>>> They didn't say.  It was first sent in because of a bad chirp on cw.  It
>>> was sent back claiming no problem was found.  I recorded it on the air and
>>> it was sent it back.   A few  weeks later it came back with a note that
>>> said it was not repairable.
>>> ----- Original Message ----- From: "Mike Bryce" <prosolar at sssnet.com>
>>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>>> Cc: "ten tec ref" <tentec at contesting.com>; "Seymour Miller" <
>>> k2xf at nycap.rr.com>; "John Pritt" <jpritt at wellscomm.com>
>>> Sent: Tuesday, January 07, 2014 1:03 AM
>>> Subject: Re: [TenTec] Omnii 6 PLL board
>>>
>>>
>>>  Just wondering.
>>>>
>>>> What did they say was wrong with it ?
>>>>
>>>> Bad CPU?
>>>>
>>>> Mike wb8vge
>>>>
>>>> Sent from my iPhone
>>>>
>>>>  On Jan 6, 2014, at 6:32 PM, "Ernie Popp" <k2ep at nycap.rr.com> wrote:
>>>>>
>>>>> Looking for a 5.0 - 5.5 MHz PLL board PN 81599 for an Omni 6+. The
>>>>> radio belongs to K2XF and Ten tec said it was not repairable. At least for
>>>>> a reasonable price. Maybe some one has a hanger queen and is willing to
>>>>> part it out. Looking for any leads.
>>>>>
>>>>> 73, Ernie K2EP
>>>>>
>>>>> _______________________________________________
>>>>> TenTec mailing list
>>>>> TenTec at contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>