[TenTec] BW and Eagle

[Carl Moreschi]

John,

Can't you define the BW command in the INI as two concatenated BW 
commands with the second one always BW=0?

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 7/28/2014 9:20 AM, John Henry wrote:
> Regarding Bandwidth.
> Given that the Eagle has the "feature" to ignore the POT for BW if a CAT BW
> command comes in, I suggest that you remove the BW set command from the ini
> file for the Eagle. Just adjust it quick yourself on the rig front panel,
> always. Not as convenient as N4PY control, but, it will still work.
> I did prove this will work by removing the BW pot adjustment from my
> Eagle.ini file.
> (and running BandMaster as you suggested)
>
> Now, mode, well, I see it always sends out *RMM0, regardless of the mode.
> It might be my ini file, not sure, but will check it over a bit more. I
> don't know if it is a bug in BandMaster itself, or what.
> FYI, My Eagle.ini file does permit the digital U and L now, it just tells
> the Eagle to put them into USB and LSB appropriately, which is the desired
> mode for digital usage in the Eagle.
>
> When I get a chance this week, I'll try to figure out if I have a mode
> syntax error in the ini file, or if indeed it is always telling it omnirig
> to tell the rig to go to mode 0, which is USB.
>
> Stay tuned. Not done yet, but almost there.
> And, fyi, I will call this a success in a few days either way. I have it
> working frequencies and split very well.
> Take care of the bw thing by not sending BW via the omni rig Eagle.ini file.
> And hopefully I will have a fix for the mode issue.
>
> Thanks, and 73,
> John Henry, KI4JPL
> TEN-TEC Engineering, a Division of RFConcepts LLC
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>