[TenTec] BW and Eagle

[Carl Moreschi]

I've had no complaints at all about BW jumping.  But I have an option in 
my program so you can do it either way.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 7/28/2014 11:34 AM, John Henry wrote:
> Regarding
> ------------
>
> Can't you define the BW command in the INI as two concatenated BW
> commands with the second one always BW=0?
>
> Carl Moreschi N4PY
>
> ------------
>
> Carl,
>
> Great idea. Sometimes I don't see the tree for the forest.
> This should work well and give Rick and others what they want (well, need
> to test it first), in that it should let the Eagle then utilize control via
> the BW pot again without having to shut down the control program.
>
> How many complaints have you had Carl regarding the "jumping" BW? (e.g. if
> you have it set for 6k via the pot, run N4PY, change BW there to 300 or so
> for CW, accidentally bump the BW pot and all of a sudden you are at 6k or
> 5800 or???)
>
> Since you implemented it this way in N4PY, implementing it in OmniRig the
> same way should be ok then.
> I'll try it, and see what happens.
>
> Thanks, and 73,
> John Henry, KI4JPL
> TEN-TEC Engineering, a Division of RFConcepts LLC
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>