[TenTec] Eagle

[Bob McGraw - K4TAX]

For no particular reason or explanation, I would suggest you perform a 
Master Reset.  From that point, you will need to visit the CONFIG menu to 
enter and activate the correct items based on your exact configuration. 
Once done, all should be well.

As a general point.  Always bring the power supply up or turn on first and 
then turn on the radio.  Reverse the steps when shutting things down.  It is 
the safe computer way of doing things.

73
Bob, K4TAX



DISCLOSURE:
This is to inform all persons, I am a Tentec Ambassador and I receive
compensation according to the Tentec Ambassador program.  In addition, I
serve as a volunteer beta test person to Tentec for the Omni VII, Eagle
and Argonaut VI radios.  I hold no employment relationship, no financial
interests nor do I conduct any commercial business, direct or indirect,
with Tentec.






----- Original Message ----- 
From: "John Mendenhall via TenTec" <tentec at contesting.com>
To: <tentec at contesting.com>
Sent: Thursday, July 31, 2014 1:03 PM
Subject: [TenTec] Eagle


> Got mine on 7/30. Powered up this am.  No rx audio, tuner would 
> continuously tune into a dummy load when commanded. Went into the 
> configuration menu to verify every everything as soon as I went out of the 
> configuration menu had rx audio, beeps on button pushes, and antenna tuner 
> now works ? Just a heads up!
> 73 john
> Sent from my iPad
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>