[TenTec] Omni VI Help

[Paul Kraemer]

On mine it was the ovenized crystal on the main board that the heating 
winding shorted to ground
I replaced that with new TCXO from TenTec
Pricey but what a difference!
If they no longer have it there are alternatives available at a much lower 
cost
Paul K0UYA

--------------------------------------------------
From: "DAVID" <k9ux at comcast.net>
Sent: Monday, June 16, 2014 10:02 AM
To: <tentec at contesting.com>
Subject: [TenTec] Omni VI Help

> Hi everyone. I need some advice on an Omni VI I picked up at an estate 
> sale. It's a nice looking rig, loaded with filters, but
> it will not power up. It is shorting the DC voltage to ground it appears. 
> Took it to a friend's house and hooked it to an Astron
> 30 amp supply and the voltage dropped to zero!! Darn!!
> So can anybody give me some advice as to what to look for or should I just 
> bite the bullet and send it to Ten Tec??
>
> Thanks in advance, Dave K9UX
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec