[TenTec] 8 pin Din Plug Splitter

[Bob McGraw - K4TAX]

Personally I made my own break-out box.  I found some chassis mount DIN 
connectors at Radio Shack as well as a nice group of RCA female chassis 
connectors.  With a bit of wiring and a Radio Shack project box, I can now 
connect up to 4 different DIN devices and a host of other stuff to the RCA 7 
connectors.

Foot switch, external key, audio monitor speakers, test box for measuring 
and injecting signals and a host of other stuff.  With this much flexibility 
one has to be careful and not try to do three or 4 things at once or the 
signals and logic gets very confused.  Otherwise, it is something I use 
daily at my station and my service bench.

This box works with the Orion series, Omni VII, Eagle and Argonaut VI 
radios.

73
Bob, K4TAX...........just being a ham at heart.



----- Original Message ----- 
From: "Brian Sarkisian, KG8CO via TenTec" <tentec at contesting.com>
To: <tentec at contesting.com>
Sent: Monday, June 16, 2014 7:45 PM
Subject: [TenTec] 8 pin Din Plug Splitter


>I discovered that if I want to use the Ten Tec USB digital interface with 
>the the Eagle, I will not
> be able to connect an amp key line.
>
> Can anyone recommend a place that would carry a 8 pin din Y cable
>
>
> Thank you
>
>
> Brian, KG8CO
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>