[TenTec] Omni VI+ computer hookup

[Jim Allen]

I have only one radio connected at a time.  The other radio in Win-EQF is a
706MKIIG but that is seldom used.

All I did was take out the Omni VI opte and plug in the VI+.

Where do I find the TNC?

73 de W6OGC  Jim Allen


On Tue, Jun 17, 2014 at 6:40 AM, robert brannigan via TenTec <
tentec at contesting.com> wrote:

> Win-Eqf  allows the use of two radios. The problem, if any, is in the
> setting of the ComPorts and the selection of the DTR/RTS  modes. Check
> "Device Manager" for the ComPorts and make sure you have selected the right
> ones. RTS/DTR is OFF on both radios. Obviously you will need two serial
> ports or USB adapter cables to the RS-232 on the rear.
>
> My money is on the comports.
>
> Bob  W2EJG
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>