[TenTec] Orion not TXing

[Carl Moreschi]

Try the complete reset below.

1) Power off Orion.

2) Power On holding the VFO B LCK button.

3) Continue holding LCK button until the radio says "Battery Failure".

4) Power off Orion.

5) Power on holding "Main RX/TX" button.

6) Continue holding this button until the radio says reset complete.

7) Do not clear any settings when asked to do so.

8) Power the Orion off and back on one more time.





Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 6/29/2014 7:32 PM, Paul A. Ramey wrote:
> I need some help.
> I have an Orion, 565. Turned it on today and RX working FB. When I tried
> to transmit, no power out, ALC light or meter movement while transmitting.
> I can RX on any band, the voice recorder works and I can hear it when I
> key with mic or send 1,2,&3
> I get the same problem on A and B VFO's all controls work and function
> as they should............but I am not getting any power out or
> indication of power out. The SWR reads 1.01 when I try to TX.
>
> Any ideas?
> Thanks!
>
> Paul, WG0G
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>