[TenTec] Orion not TXing

[G3WPF]

Also check that the power poles are properly seated in the back of the rig, 
especially if there has been any stress on the power cable externally.  I 
had a similar problem and this was the cause.

-----Original Message----- 
From: Paul A. Ramey
Sent: Monday, June 30, 2014 12:32 AM
To: tentec at contesting.com
Subject: [TenTec] Orion not TXing

I need some help.
I have an Orion, 565.  Turned it on today and RX working FB.  When I
tried to transmit, no power out, ALC light or meter movement while
transmitting.
I can RX on any band, the voice recorder works and I can hear it when I
key with mic or send 1,2,&3
I get the same problem on A and B VFO's  all controls work and function
as they should............but I am not getting any power out or
indication of power out.  The SWR reads 1.01 when I try to TX.

Any ideas?
Thanks!

Paul, WG0G

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec