[TenTec] Paragon Band Coverage

[Bob McGraw - K4TAX]

The jumper is on the processor board, on the left side, about 1/2 way from 
front to back of the board.  Cut the jumper and it opens up transmit from 
1.8 MHz to near 30 MHz.

73
Bob, K4TAX


----- Original Message ----- 
From: "Pete Ferrand" <petef at sprynet.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>; 
<k4avx1 at windstream.net>
Sent: Wednesday, March 05, 2014 4:34 PM
Subject: Re: [TenTec] Paragon Band Coverage


>
> The Paragon works great on the WARC bands and 60m as well. But you do have 
> to cut a wire jumper that I think is labeled "ham" in order to enable 
> transmit. I don't have time to research it but it's probably in the 
> manual, if not check on the web. It's easy to find inside the rig.
>
> GL es 73,
> -Pete
> WB2QLL
> Somers, WI
>
>
>
>
>
>
> -----Original Message-----
>>From: John Farler <k4avx1 at windstream.net>
>
>>Any hooo I want maybe to sneak over to 30 Meter CW for a little
>>while, but he's not sure it covers that band.  I'm sure it does,
>>because my old Omni D has it, as does my Corsair.  If other wise,
>>someone can let me know.
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>