[TenTec] Eagle Mini-Din (?) connector

[Lee WA3FIY]

John,

That connector is a "regular" DIN....not a "Mini" DIN.   Don't have a Mouser p/n handy and my 
Internet connection will not connect to most web pages the last couple days including 
Mouser.  Sorry.

There are DIN's made with better plastic material that do not melt when you solder the 
contacts.  

-Lee-

WA3FIY

On 19 Sep 2014 at 13:57, John wrote:

> I've used the ACC-1 connector that came with the Eagle to connect an
> amplifier interface.
> 
> Unfortunately, due to the soft plastic or my poor soldering skills, it
> almost melted when I connected to it.  In looking for a replacement,
> all the 8 pin mini-din plugs that I assumed it to be had the big key
> in the middle of them.
> 
> Anyone know the correct nomenclature or part number from a
> retailer, Mouser, Digikey, etc?  No, I don't want another one
> that I might melt.  This is my most disliked connector to start
> with - too many small parts to assemble to make it whole.
> 
> Thanks for any help.
> 
> John, K4AVX
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>