[TenTec] Subject: Re: din connector, news from Hall Mountain KY

[John F.]

Dennis,
I just bought an Eagle, so not in the Market for anything else at
this time.  Have an Omni V, a Corsair II with DDS Vfo, an old
540, and an Argo 509, so I'm still in good shape TT wise!

Bob, I'm not really too concerned since I have WB8VGE's amp
keyer, and it works fine.  I'll have two male DIN plugs with
wires already soldered to the plug, so I won't have to try
to solder anything else to the current ACC1 meltable  plug to
attach anything besides the amp keyer.

So I'm not in the market for the 318 at this point, since I
can easily put two devices on the cable I'll have, as has
been suggested with the 318.

73, John, K4AVX






> JOHN;
>
>       If you need another VI+ I have 2 of then for sale and both one
> owner each with filters,power supply and mikes.
>
>
>       Dennis AE2EE/AAR2LD

Message: 15
Date: Sun, 21 Sep 2014 06:42:54 -0500
From: "Bob McGraw - K4TAX"<RMcGraw at Blomand.net>
To: "Discussion of Ten-Tec Equipment"<tentec at contesting.com>
Subject: Re: [TenTec] din connector, news from Hall Mountain KY
Message-ID: <4F9C9A6E261247C18A2908199EC99761 at FAMILY>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=response

Seem to recall that Tentec has a "Y" type connector that will allow one to
use two devices such as a soundcard and amp keying line.

Also, seem to recall the amp keying accessory {318} has a 2nd DIN that
allows for amp keying delay plus a second accessory.

Might check with Paul in Service on this.

73
Bob, K4TAX