[TenTec] TenTec Digest, Vol 146, Issue 15

[Carl Moreschi]

Your procedure for calibration does not sound correct.  First "Polling" 
must be off and not used in order to use frequency calibration.  Then 
you find the place where WWV sounds the same on both USB and LSB and 
then click calibrate.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 2/16/2015 12:06 PM, David Perrin wrote:
> Hi Carl-
> Yes, same "freq off by 1.5Mhz" when switching band with a click on the band button, or by moving slider.
>
> 73 de Dave. K1OPQ/4
>
> Sent from my iPhone
>
>> On Feb 16, 2015, at 12:00 PM, tentec-request at contesting.com wrote:
>>
>> Send TenTec mailing list submissions to
>>     tentec at contesting.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>     http://lists.contesting.com/mailman/listinfo/tentec
>> or, via email, send a message with subject or body 'help' to
>>     tentec-request at contesting.com
>>
>> You can reach the person managing the list at
>>     tentec-owner at contesting.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TenTec digest..."
>>
>>
>> Today's Topics:
>>
>>    1. Re: jupiter firmware (Al Sirois)
>>    2. Re: jupiter firmware (chuck adams)
>>    3. Re: jupiter firmware (Clayton Brantley via TenTec)
>>    4. Re: jupiter firmware (Mike Bryce)
>>    5. Re: jupiter firmware (Mike Bryce)
>>    6. Re: jupiter firmware (Fernando)
>>    7. Re: jupiter firmware (Clayton Brantley via TenTec)
>>    8. EAGLE and N4PY software issue (David Perrin)
>>    9. Fwd: EAGLE and N4PY software issue (David Perrin)
>>   10. Re: EAGLE and N4PY software issue (Carl Moreschi)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sun, 15 Feb 2015 12:13:05 -0500
>> From: "Al Sirois"<alsirois at roadrunner.com>
>> To: "Discussion of Ten-Tec Equipment"<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:<2C74001297434509B07EC303D24345A3 at officepc>
>> Content-Type: text/plain; format=flowed; charset="utf-8";
>>     reply-type=original
>>
>> One has to be FAST with pencil waiting. Re-Start-up a 2/nd time to finish
>> that was missed.
>> N1MHC at arrl.net
>> ===============
>>
>> -----Original Message-----
>> From: Mike Bryce
>> Sent: Sunday, February 15, 2015 11:31 AM
>> To: Discussion of Ten-Tec Equipment
>> Subject: [TenTec] jupiter firmware
>>
>> Gang?
>>
>> simple question
>>
>> how do you display what firmware a jupiter is running?
>>
>> I know there is a splash screen at startup, but it?s really fast.
>>
>> I can?t remember what button to press to display the firmware
>>
>> thanks
>>
>>
>> Mike Bryce, WB8VGE
>> the heathkit shop
>> SunLight energy systems
>> J e e p
>> o|||||||o
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sun, 15 Feb 2015 10:20:04 -0700
>> From: chuck adams<chuck.adams.k7qo at gmail.com>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:<54E0D544.5070403 at gmail.com>
>> Content-Type: text/plain; charset=utf-8; format=flowed
>>
>>
>>
>> Let's see now.  It's the 21st century.  You all own an iPhone and
>> an iPad and maybe even a HD movie camera....
>>
>> How about a snippet of recording using any or all of the above
>> devices and replay frame by frame?
>>
>> chuck, k7qo
>>
>>> On 02/15/2015 10:13 AM, Al Sirois wrote:
>>> One has to be FAST with pencil waiting. Re-Start-up a 2/nd time to
>>> finish that was missed.
>>> N1MHC at arrl.net
>>> ===============
>>>
>>> -----Original Message----- From: Mike Bryce
>>> Sent: Sunday, February 15, 2015 11:31 AM
>>> To: Discussion of Ten-Tec Equipment
>>> Subject: [TenTec] jupiter firmware
>>>
>>> Gang?
>>>
>>> simple question
>>>
>>> how do you display what firmware a jupiter is running?
>>>
>>> I know there is a splash screen at startup, but it?s really fast.
>>>
>>> I can?t remember what button to press to display the firmware
>>>
>>> thanks
>>>
>>>
>>> Mike Bryce, WB8VGE
>>> the heathkit shop
>>> SunLight energy systems
>>> J e e p
>>> o|||||||o
>>>
>>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Sun, 15 Feb 2015 17:41:15 +0000 (UTC)
>> From: Clayton Brantley via TenTec<tentec at contesting.com>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:
>>     <1340903301.6032190.1424022075619.JavaMail.yahoo at mail.yahoo.com>
>> Content-Type: text/plain; charset=UTF-8
>>
>> The answer in in the manual.? I sold my Jupiter and no longer have the book.? I did read about that once.
>> Clayton N4EV
>>
>>       From: Mike Bryce<prosolar at sssnet.com>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Sent: Sunday, February 15, 2015 11:31 AM
>> Subject: [TenTec] jupiter firmware
>>
>> Gang?
>>
>> simple question
>>
>> how do you display what firmware a jupiter is running?
>>
>> I know there is a splash screen at startup, but it?s really fast.
>>
>> I can?t remember what button to press to display the firmware
>>
>> thanks
>>
>>
>> Mike Bryce, WB8VGE
>> the heathkit shop
>> SunLight energy systems
>> J e e p
>> o|||||||o
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Sun, 15 Feb 2015 12:59:28 -0500
>> From: Mike Bryce<prosolar at sssnet.com>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:<01CDED96-ACEE-4FB0-9326-34CEC8E2EAEF at sssnet.com>
>> Content-Type: text/plain;    charset=utf-8
>>
>> you?re right!
>>
>> it is the 21st century.
>>
>> on shouldn?t have to stand on one?s head to do a simple thing like finding out what version of firmware is running on a Ten Tec Jupiter.
>>
>>
>> Mike, WB8VGE
>> SunLight Energy Systems
>> The Heathkit Shop
>> http://www.theheathkitshop.com/<http://www.theheathkitshop.com/>
>> J e e p
>> o|||||||o
>>
>> A man with one clock knows what time it is. A man with two clocks is never sure.
>>
>>
>>
>>> On Feb 15, 2015, at 12:20 PM, chuck adams<chuck.adams.k7qo at gmail.com>  wrote:
>>>
>>>
>>>
>>> Let's see now.  It's the 21st century.  You all own an iPhone and
>>> an iPad and maybe even a HD movie camera....
>>>
>>> How about a snippet of recording using any or all of the above
>>> devices and replay frame by frame?
>>>
>>> chuck, k7qo
>>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Sun, 15 Feb 2015 13:00:24 -0500
>> From: Mike Bryce<prosolar at sssnet.com>
>> To: Clayton Brantley<clayton_n4ev at yahoo.com>,    Discussion of Ten-Tec
>>     Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:<3E8000E9-2992-40A6-A591-63637075A9F5 at sssnet.com>
>> Content-Type: text/plain;    charset=utf-8
>>
>> I looked. Couldn?t see it anyplace. Even went to the ten tec wiki?
>>
>>
>> Mike Bryce
>> prosolar at sssnet.com
>>
>>
>>
>>> On Feb 15, 2015, at 12:41 PM, Clayton Brantley via TenTec<tentec at contesting.com>  wrote:
>>>
>>> The answer in in the manual.  I sold my Jupiter and no longer have the book.  I did read about that once.
>>> Clayton N4EV
>>>
>>>
>>
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Sun, 15 Feb 2015 10:01:21 -0800
>> From: Fernando<n2fq at sbcglobal.net>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:<B0889AFA-3FD1-4E51-8F27-37DEFA32122A at sbcglobal.net>
>> Content-Type: text/plain;    charset=utf-8
>>
>> ALT ->  STEP and release.
>> Fernando N2FQ/6
>> n2fq at sbcglobal.net
>>
>>
>>
>>
>>> On Feb 15, 2015, at 8:31 AM, Mike Bryce<prosolar at sssnet.com>  wrote:
>>>
>>> Gang?
>>>
>>> simple question
>>>
>>> how do you display what firmware a jupiter is running?
>>>
>>> I know there is a splash screen at startup, but it?s really fast.
>>>
>>> I can?t remember what button to press to display the firmware
>>>
>>> thanks
>>>
>>>
>>> Mike Bryce, WB8VGE
>>> the heathkit shop
>>> SunLight energy systems
>>> J e e p
>>> o|||||||o
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>
>> ------------------------------
>>
>> Message: 7
>> Date: Sun, 15 Feb 2015 19:12:09 +0000 (UTC)
>> From: Clayton Brantley via TenTec<tentec at contesting.com>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] jupiter firmware
>> Message-ID:
>>     <1764545618.6122742.1424027529566.JavaMail.yahoo at mail.yahoo.com>
>> Content-Type: text/plain; charset=UTF-8
>>
>> Mike:? Think Fernando hit it on the head!
>>
>> Hope that works.Clayton N4EV
>>      From: Fernando<n2fq at sbcglobal.net>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Sent: Sunday, February 15, 2015 1:01 PM
>> Subject: Re: [TenTec] jupiter firmware
>>
>> ALT ->  STEP and release.
>> Fernando N2FQ/6
>> n2fq at sbcglobal.net
>>
>>
>>
>>
>>> On Feb 15, 2015, at 8:31 AM, Mike Bryce<prosolar at sssnet.com>  wrote:
>>>
>>> Gang?
>>>
>>> simple question
>>>
>>> how do you display what firmware a jupiter is running?
>>>
>>> I know there is a splash screen at startup, but it?s really fast.
>>>
>>> I can?t remember what button to press to display the firmware
>>>
>>> thanks
>>>
>>>
>>> Mike Bryce, WB8VGE
>>> the heathkit shop
>>> SunLight energy systems
>>> J e e p
>>> o|||||||o
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 8
>> Date: Sun, 15 Feb 2015 21:04:51 -0500
>> From: David Perrin<dbperrin at gmail.com>
>> To: Tentec reflector<tentec at contesting.com>
>> Subject: [TenTec] EAGLE and N4PY software issue
>> Message-ID:<E3F5E574-AD93-45A3-B3C9-53BA6C2608B3 at gmail.com>
>> Content-Type: text/plain; charset=utf-8
>>
>> Hi-
>>      I have my older EAGLE connected to my Toshiba notebook (no serial ports) with a USB cable and the COM (UART) is at com12. I  get pretty good communication between the computer and the EAGLE, but one problem persists.
>>     The software misses the frequency of the EAGLE by 1.5MHz. Many times I have set the frequency of the EAGLE to 10MHz and the software to 10MHz, and I have fine tuned both to get the same pitch on both USB and LSB, I have set A=B to both VFO?s, I have run the Calibrate routine. It all looks the same on the software and the EAGLE.
>>     As soon as I try to change the frequency of the software by sliding the tuner dial the EAGLE jumps frequency by 1.5 MHz to 8.5MHz.
>>     What is up with that? Any ideas?
>>
>> 73 de Dave, K1OPQ/4
>>
>> ------------------------------
>>
>> Message: 9
>> Date: Sun, 15 Feb 2015 21:07:27 -0500
>> From: David Perrin<dbperrin at gmail.com>
>> To: Tentec reflector<tentec at contesting.com>
>> Subject: [TenTec] Fwd: EAGLE and N4PY software issue
>> Message-ID:<F1917C10-3CE6-4333-85C3-E07A421356DE at gmail.com>
>> Content-Type: text/plain;    charset=utf-8
>>
>> My apologies if this is a repeat:
>>
>>> Begin forwarded message:
>>>
>>> Subject: EAGLE and N4PY software issue
>>> From: David Perrin<dbperrin at gmail.com>
>>> Date: February 15, 2015 at 9:04:21 PM EST
>>> To: Tentec reflector<tentec at contesting.com>
>>>
>>> Hi-
>>>      I have my older EAGLE connected to my Toshiba notebook (no serial ports) with a USB cable and the COM (UART) is at com12. I  get pretty good communication between the computer and the EAGLE, but one problem persists.
>>>     The software misses the frequency of the EAGLE by 1.5MHz. Many times I have set the frequency of the EAGLE to 10MHz and the software to 10MHz, and I have fine tuned both to get the same pitch on both USB and LSB, I have A=B to both VFO?s, I have run the Calibrate routine. It all looks the same on the software and the EAGLE.
>>>     As soon as I try to change the frequency of the software by sliding the tuner dial the EAGLE jumps frequency by 1.5 MHz to 8.5MHz.
>>>     What is up with that? Any ideas?
>>>
>>> 73 de Dave, K1OPQ/4
>>
>>
>>
>> ------------------------------
>>
>> Message: 10
>> Date: Mon, 16 Feb 2015 08:41:57 -0500
>> From: Carl Moreschi<n4py3 at earthlink.net>
>> To: Discussion of Ten-Tec Equipment<tentec at contesting.com>
>> Subject: Re: [TenTec] EAGLE and N4PY software issue
>> Message-ID:<54E1F3A5.3090500 at earthlink.net>
>> Content-Type: text/plain; charset=UTF-8; format=flowed
>>
>> I will get back home on Feb 22 and I will test it out then to see if I
>> can reproduce your results.  But does this happen if you don't use the
>> frequency scale slider and instead use the band buttons to change frequency.
>>
>>
>> Carl Moreschi N4PY
>> 58 Hogwood Rd
>> Louisburg, NC 27549
>> www.n4py.com
>>
>>> On 2/15/2015 9:04 PM, David Perrin wrote:
>>> Hi-
>>>      I have my older EAGLE connected to my Toshiba notebook (no serial ports) with a USB cable and the COM (UART) is at com12. I  get pretty good communication between the computer and the EAGLE, but one problem persists.
>>>     The software misses the frequency of the EAGLE by 1.5MHz. Many times I have set the frequency of the EAGLE to 10MHz and the software to 10MHz, and I have fine tuned both to get the same pitch on both USB and LSB, I have set A=B to both VFO?s, I have run the Calibrate routine. It all looks the same on the software and the EAGLE.
>>>     As soon as I try to change the frequency of the software by sliding the tuner dial the EAGLE jumps frequency by 1.5 MHz to 8.5MHz.
>>>     What is up with that? Any ideas?
>>>
>>> 73 de Dave, K1OPQ/4
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>> ------------------------------
>>
>> End of TenTec Digest, Vol 146, Issue 15
>> ***************************************
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>