[TenTec] Jupiter speaker replacement....

Rodney w3krq at dejazzd.com
Tue Jan 13 19:11:39 EST 2015


I told you where you can get one.

-----Original Message----- 
From: Stuart Rohre
Sent: Tuesday, January 13, 2015 6:52 PM
To: tentec at contesting.com
Subject: Re: [TenTec] Jupiter speaker replacement....

It is true you can often substitute a 4 or 8 ohm speaker, if the driving
amplifier has enough power to drive 4 ohms. You can make a test with a
resistor to see if the amplifier can deliver the current with no
overheating of the Amp. chip.

If you only can find a 4 ohm, and you think or can prove the old one was
8, you can use a power resistor in series to sink the excess current.

I have, in a pinch substituted a smaller speaker, mounted by one bolt,
to get something working, with a note that correct speakers were on back
order from Ten Tec.

Or, sub an external computer speaker box plugged to the headphone jack,
again with a note on the rig.

Check the surplus houses like Electronic Goldmine, and all the regular
large distributors.  Surely there is the right size one out there somewhere!

GL,
Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec 




More information about the TenTec mailing list