[TenTec] Model 263 External VFO for sale

[Gary - AB9M]

I have a Ten Tec Model 263 VFO, which had the "jump" problem. The LED 
BARGRAPH Calibration procedure in the 263 manual fixed mine. You need a 
Corsair-II with working digital frequency readout to do the calibration. I 
did not have an RF Volt meter (or oscilloscope) which is needed for the 
"BALANCE" adjustment.


73 & DX,

Gary - AB9M

-----Original Message----- 
From: Jock Irvine
Sent: Friday, July 03, 2015 5:33 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Model 263 External VFO for sale

Ten Tec Model 263 VFO

This is the matching external VFO for the Corsair.  There is a small
problem with the Receive-B button that I called Ten Tec about just before
they moved to their new location.  They said that an alignment would
probably fix it but, since I don't have an RF volt meter, I never attempted
it.  I will email the buyer a PDF copy of the manual and the alignment
procedure is in there.

This is the problem; The PTO is stable, but when you depress the Receive-B
switch the frequency jumps all over the place.  It works fine if you press
Receive A&B and pan the control all the way to B, which is how I was using
it for split operation up until the day I sold my Corsair last May.

Some scratches on the left side, otherwise in very good condition.

Price is $100 (including shipping) in the continental USA.

Please contact me for photos or other information.

73,

Jock N1JI
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec