[TenTec] Omni 6 Plus intermittent no TX or RX on 10 meters

[Jim Allen]

When I sent my Omni VI+ in for that, on 160,and low output on 30M, they replaced the relays, all of them for each band.

73 de W6OGC Jim Allen 
Sent from my iPad

> On Jun 25, 2015, at 2:42 PM, Joe Papworth via TenTec <tentec at contesting.com> wrote:
> 
> Radio Gurus,  
> My Omni 6 Plus has an intermittant no RX/TX problem on ten meters only. The 
> freq display reads correctly and the ALC led comes on as it should when I 
> key  the rig. 
> I spoke with Paul at Ten Tec. He thinks it's almost certainly a problem on  
> the oscillator/LO mixer board. (I.e a Lock Pulse problem)
> I thought I'd run it by you guys before I rip into it.
> Later, Joe
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec