[TenTec] Replay to Rick regarding the Eagle

Rick - DJ0IP / NJ0IP Rick at DJ0IP.de
Thu Nov 5 01:57:54 EST 2015


John,

I didn't mean that kind of RF choke.
I mean a Maxwell or Guanella choke.

A Maxwell choke is the kind where there are large ferrite beads slid over the outside of the coax, then they are covered with heat-shrink tubing.
A Guanella choke is where coax is simply wound for a certain number of turns around a big ferrite toroid.

Every time I get anything strange happening in the shack, the first thing I do is connect one of these Maxwell chokes to the transceiver.

Some companies sell these and call them "Line Isolators", but those who call them that are asking 2x or 3x as much money for them as you need to pay.  A good one costs $29 and is available from the WIREMAN, Model No. 8231.
On this page:  http://thewireman.com/baluns.html#854 
Note:  click on the little eye just next to the part number and you will be shown a page with pictures.  It is the piece of coax with beads on it.

No guarantee that this will solve that problem but it is something one should always use anyway.  It often results in a quieter reception because it helps remove noise picked up by on the outside of the coax that was generated from household consumer products.

73 - Rick, DJ0IP
(Nr. Frankfurt am Main)

-----Original Message-----
From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of John King via TenTec
Sent: Wednesday, November 04, 2015 11:17 PM
To: Discussion of Ten-Tec Equipment
Cc: John King
Subject: [TenTec] Replay to Rick regarding the Eagle

 Rick, must the RF choke be placed inside the Eagle cabinet or can it be placed outside on the SO 239 from a Tee coax connector to ground?  Thanks for your assistance. 73, John, K5PGW _______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



More information about the TenTec mailing list