[TenTec] Ten-Tec 262G P.S.

[James Boswell]

On 11/18/2015 7:49 PM, Tony Lelieveld wrote:
> Hi all,
> I am looking for a schematic for this power supply. A friend got one without a radio. It has the knobs on the front for a VOX system too but that is not important. We need to know which 2 pins need a jumper on the plug at the back so he can switch it on/off with the button on the front. Any info will be much appreciated.
> 73, Tony VE3DWI. email (VA3DWI at gmail.com).
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
Tony,
	The center two pins can be tied together if you want to use the PS as a 
stand alone unit. Those two pins will be hot with 120VAC so be sure and 
insulate them. I have done this with 5 or 6 older TenTec power supplies.

	Hope that helps,  73'S  KA5SIW

 >     James B. Boswell                           JBoswell at NRAO.edu
 >     VLA Engineering Services                   Office: 575 835-7427
 >     National Radio Astronomy Observatory       C.Phone 505 412-3732
 >     Post Office Box 0
 >     1003 Lopezville Road
 >     Socorro, New Mexico  87801