[TenTec] OT: Come On Guys

Wed Apr 27 07:00:30 EDT 2016

That only works as long as you're the only one doing that.

Back in the 60' I had a friend racing figure 8.
He did something similar.
He covered the driver's side window with aluminum, and blackened out the first foot (on the left) of the front screen.

Result: he began winning races.  Everyone else knew that fool wasn't going to give way or slow down.

A few weeks later they outlawed that.

73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)

-----Original Message-----
From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of Joe Papworth via TenTec
Sent: Wednesday, April 27, 2016 12:24 PM
To: tentec at contesting.com
Cc: k8mp at aol.com
Subject: Re: [TenTec] OT: Come On Guys

One simple rule covers all forms of traffic control: "Close your eyes and punch it"
Joe, K8MP

Sent from AOL Mobile Mail

-----Original Message-----
From: rick at dj0ip.de <Rick at DJ0IP.de>
To: 'Discussion of Ten-Tec Equipment' <tentec at contesting.com>
Sent: Wed, Apr 27, 2016 03:39 AM
Subject: [TenTec] OT:  Come On Guys

JUST TO CONFUSE THE RUSSIANS . . .

It really gets fun when using a "Navi" in cities you are unfamiliar with.

For instance, when you approach what used to be a 4-way intersection (is now a traffic circle) and need to turn LEFT . . .

Your Navi tells you "3rd RIGHT".
That took some getting used to.

BTW, most Europeans are clueless about how a 4-way stop works.

Simple Simon... to those of us who know.
But if you were never told and encounter one for the first time, just watching it doesn't seem to give any clue as to the rules for using it.

The rules are simple and any and everyone can use it, once they are informed how it works.
SAME SAME for the trafic circle.

People too lazy to inform themselves and prefer to reject progress and change, are part of the problem.

Local ordinances who implement these traffic circles without promoting its advantages (and how it works) to the public are a much larger part of the problem.

ALL OF THE ABOVE AND ALL BEFORE was based on "Traffic Circles 101" .

In some larger cities in Italy and France, they have huge traffic circles with 5 or more roads feeding into them and NOTHING in the middle of the circle.  They are the size of two football fields, side by side, but round.

Traffic basically circulates counter clockwise in 3 to 5 lanes (or many more) but there are always several people taking short cuts straight through it all.  

Believe it or not, there are very few accidents - apparently because people pay attention to their driving and to others around them.

I was OK with these in France but in Italy they left me baffeled. 
Seems every Italian was driving with one arm out the window shaking his fist and the other hand honking the horn.  I have now idea how they steer their cars!  ;-)

PROOF:  See Map of Paris France with "Concentric trafic circles" around the "Arc de Triomphe", having 11 streets feeding the inner circle and 18 streets (!) feeding the outer circle.
(See: <a href="https://www.google.com/maps/@48.8739547,2.2952297,17z" target="_blank">https://www.google.com/maps/@48.8739547,2.2952297,17z</a>)

How it looks from within:
<a href="https://www.google.com/maps/@48.8733341,2.2956354,3a,60y,90t/data=!3m6!1e1!3m4!1s-Fch4GsNkAmn9fbGsiElNw!2e0!7i13312!8i6656" target="_blank">https://www.google.com/maps/@48.8733341,2.2956354,3a,60y,90t/data=!3m6!1e1!3m4!1s-Fch4GsNkAmn9fbGsiElNw!2e0!7i13312!8i6656</a>
(Use the navigation arrow  (bottom right) to navigate around 360 degrees. This was definitely not rush hour. During rus hour it is jam packed with traffic.)

(BTW, in the meantime they have blockaded the road through the middle of the Arc of Triumph, so you can't go straight across anymore. That made it much easier to navigate.)

And sure I love to talk Ten-Tec...
 will also be glad when they give us something to talk about.

Heard Ten-Tec will be at Dayton.
Maybe we can get back On Topic after that.

I KNOW Ten-Tec will be at the Friedrichshafen Hamfest here in Germany, because I'm working the booth.

Cheers!

73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)

-----Original Message-----
From: TenTec [<a href="mailto:tentec-bounces at contesting.com?">mailto:tentec-bounces at contesting.com</a>] On Behalf Of Richard Tschur
Sent: Wednesday, April 27, 2016 2:24 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Come On Guys

Just want to put my 10 cents worth in here too!
Has anyone of you ever had a contact on 27.55905512 inches?? Or even on
262.4671916 feet?? Or we could call it 70cm or 80m. Much easier! I'm a german, living in Australia and my back"yard" is big enough, to put up an 80m loop, even though I have only 2 feet! I never really understood, how someone can measure anything easily or calculate in 5/16th or in /32th??? A cm is a cm and it usually consists off 10 mm. A lot of older people here in this country do use the imperial system and everytime they talk to me in imperial measurements, I tell them "and now please in proper numbers", as I can't get my head around that stuff. Way too complicated and awkward. And yes, there are people who weigh themselves in Stones! So how is that then? I weigh about 95 Kg (which is way too
much) and that in stones would be 14.95993922. Maybe one could say 14 stones and a few pebbles ;-))!
And as for roundabouts, as they are called here in VK,they are very useful and also fairly easy to figure out! If I want lets say (we, driving on the wrong side),want to turn left at the first exit, I of course have to be in the left lane to do so, otherwise I would crash into someone, who might go straight, to take the second exit, if that makes sense. So it is not really rocket science,but especially here in VK, where you basically get your licence in a Cornflakes Box, you can experience interesting situation. But overall, I guess it is not a bad thing. And for a laugh, here in Melbourne, we have a hook turn!! If you want to turn right on certain streets, you have to wait on the far left, in the middle of the intersection and when when the road you want to enter gets a green light, then you are allowed to turn. Not being rude, but if I imagine you guys in the states have trouble with a round about, just imagine that!!! I'm sure there is videos of a "hook turn" on youtube.
And apart from all that, this here being a TenTec forum, I can't wait to see Ten Tec back up on top of Sherwood's list again and show all the doubters, that Ten Tec is alive and will be stronger than ever! I'm sure, we will see a proper new website soon, with lots of new stuff to come.
To Mike Dishop and the Ten Tec team, I have faith in you and I know you will show all the competitors once again how it is done!!!

And one other small thing, without being racist or stepping on people's toes, but knowing American's are all so patriotic, how is it, that soo many people over there use Japanese radio's and drive Japanese cars??? 
Never really understood that......

Anyway, enough from here.
All of you have a nice week:-))!
Richard VK3KVK/DK3KVK

On 26/04/16 07:35, Gary J FollettDukes HiFi wrote:
> Well, a little fairy tale never hurt anyone.
>
> There is no justifiable reason for the USA to remain with the antiquated BSA standard.
>
> However, in reality, there is, sadly, some portion of the population that thinks the fact that the rest of the world uses the metric system is the reason why we should NOT use it.
>
> That would be admitting that someone outside USA has a better idea.
>
> Believe it or not, there are even folks here who rant about an occasional roundabout on the roadways, when they are the very most efficient way to move traffic, far better than our old stand by, the 4 way stop sign, whose only purpose is to impede traffic flow equally in all directions.
>
> Let’s see how simple this is: inches can be either divided by tenths, thousands and millionths etc., or 1/2, 1/4, 1/8, 1/16, 1/32, and so on. Then there are 12 inches per foot. Three feet to the yard. 5280 feet to the mile (unless you are talking nautical mile (6070 feet).
>
> Certainly the metric system is much more difficult - 1 micron, 1 mm, 1 cm, 1 dm, 1 m, 1 km and so on… pretty tough math!!!
>
> Gary
>
>
>> On Apr 25, 2016, at 4:18 PM, <a href="mailto:rick at dj0ip.de">rick at dj0ip.de</a> <<a href="mailto:Rick at DJ0IP.de">Rick at DJ0IP.de</a>> wrote:
>>
>> I don't think that's the reason Gary.
>>
>> If I remember correctly from my army days, The AK-47 used ever so 
>> slightly larger ammo than our M16.  As a result, they could use our 
>> ammo in their rifles, granted with a little less precision, but we 
>> could not use their ammo in ours.
>>
>> I don't think the decision was based on tools.
>> Most likely, like most everything else, there was a lobby behind that 
>> decision.
>> IMO it was a BIG mistake not to go to the same system the rest of the 
>> world uses.
>>
>> 73 - Rick, DJ0IP
>> (Nr. Frankfurt, Germany)
>>
>>
>>
>> -----Original Message-----
>> From: TenTec [<a 
>> href="mailto:tentec-bounces at contesting.com?">mailto:tentec-bounces at co
>> ntesting.com</a>] On Behalf Of Gary J FollettDukes HiFi
>> Sent: Monday, April 25, 2016 10:34 PM
>> To: Discussion of Ten-Tec Equipment
>> Subject: Re: [TenTec] Come On Guys
>>
>> It was once explained to me that the uS refuses to switch more for 
>> military reasons than any other.
>>
>> By having all BSA parts and fittings, the tool used by an adversary 
>> would not properly fit, nor would any so-called standard replacement parts.
>>
>> As far as Kg as a weight unit, you are correct, it is a mass unit, 
>> equivalent to 2.2 pounds at standard elevation and conditions.
>>
>> For most important measurements, the mass is more important than the 
>> weight (as in purchasing a gram of Gold).
>>
>> Torque is still in force-length units such as foot-pounds, 
>> ounce-inches, Newton-meters and so on.
>>
>> Gary
>>
>>
>>> On Apr 25, 2016, at 12:09 PM, Paul Littleton <<a href="mailto:ka5biw at swcp.com">ka5biw at swcp.com</a>> wrote:
>>>
>>> Normally, I am a stickler for proper units. But not when someone is 
>>> asking
>> for help. Now to address a few things.
>>> When talking to gear-heads, the terms pounds come up in tire 
>>> pressure and
>> in torque output of the engine. I usually bite my tongue and insert 
>> the proper units.
>>> As for kg weight. Have a look at cereal packages. And, there are 
>>> metric
>> systems that use kg as a unit of weight. That is just as confusing as 
>> Americans using pound for a unit of mass and a unit of force. The 
>> only saving grace is that 1 kg (1 lb) mass weighs 1 kg (1 lb) force 
>> on earth, at sea level. Still, the introduction of a constant to 
>> Newton's famous equation is a pain.
>>> Finally, kilocycles per second is still a valid and descriptive 
>>> unit. It
>> isn't in the SI system, but it makes understanding frequency easier.
>>> I would like to see the United States join much of the rest of the 
>>> world
>> and adopt SI. We would crash fewer probes on the surface of Mars that way.
>>> Best Regards,
>>> Paul
>>>
>>> tapped out on an iPad
>>> _______________________________________________
>>> TenTec mailing list
>>> <a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
>>> <a href="http://lists.contesting.com/mailman/listinfo/tentec" 
>>> target="_blank">http://lists.contesting.com/mailman/listinfo/tentec<
>>> /a>
>> _______________________________________________
>> TenTec mailing list
>> <a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
>> <a href="http://lists.contesting.com/mailman/listinfo/tentec" 
>> target="_blank">http://lists.contesting.com/mailman/listinfo/tentec</
>> a>
>>
>> _______________________________________________
>> TenTec mailing list
>> <a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
>> <a href="http://lists.contesting.com/mailman/listinfo/tentec" 
>> target="_blank">http://lists.contesting.com/mailman/listinfo/tentec</
>> a>
> _______________________________________________
> TenTec mailing list
> <a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
> <a href="http://lists.contesting.com/mailman/listinfo/tentec" 
> target="_blank">http://lists.contesting.com/mailman/listinfo/tentec</a
> >

_______________________________________________
TenTec mailing list
<a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
<a href="http://lists.contesting.com/mailman/listinfo/tentec" target="_blank">http://lists.contesting.com/mailman/listinfo/tentec</a>

_______________________________________________
TenTec mailing list
<a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
<a href="http://lists.contesting.com/mailman/listinfo/tentec" target="_blank">http://lists.contesting.com/mailman/listinfo/tentec</a>
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec