[TenTec] Orion II A9 power board

[Ben Antanaitis - WB2RHM]

Gunner,

An "old trick" to clear out holes in PC boards that are clogged with 
solder:  Use a round wooden 'tooth pick'. Push it through the hole 
from one side, while heating the solder from the opposite side.  The 
tooth pick is tapered, and non-conductive, and soft enough not the 
scratch or hurt any internal planes or the plated through hole. The 
taper will force out all of the melted solder.

GL, 73,

Ben WB2RHM