[TenTec] power switch for Tentec 961 power supply

[Steve Berg]

Those Corsair II switches in the radio are unobtainable.  You are better 
off using the On/Off switch on the power supply.

Steve WA9JML


On 8/14/2016 7:13 PM, GARY HUBER wrote:
> Allan,
>
> I have replaced the power switch in my TT-961 PS. I just checked my TT
> repairs and invoices but could not find any paperwork showing a switch
> replacement. I remember taking the switch out of the PS to get the size
> and other info and ordering a rocker switch from Mouser. (did you verify
> the power cable to your Corsair II was connected and the AF GAIN / POWER
> switch was pushed IN?)
>
> Good Luck
>
> 73 ES DX,
> Gary - AB9M
>
> On 8/14/2016 5:24 PM, Allan Taylor wrote:
>> Guys,
>>
>> My Tentec gear has sat for a year or two during a shack renovation. While
>> trying to bring the Corsair II up recently, I
>> found that the 961 power supply did nothing (nada) when toggling the power
>> switch.Thinking that it is the most likely
>> candidate for the problem, I wonder if any of the gang knows the mfgr and
>> part number for a replacement switch.
>>    (I have not contacted TT but suspect the switch is not a one off design
>> for TT only!).
>>
>> Anyone?
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>