[TenTec] Tri-Flo lubricant

[Clayton Brantley]

I might have to pick up some of the TriFlo to use this next week when we 
will PMing a 440 volt Power panel.   The old grease drys out on the main 
switch and makes it hard to reset the thing.  

Thanks to the "greasers" here for the info.

73 Clayton N4EV
--------------------------------------------
On Fri, 7/1/16, Stuart Rohre <rohre at arlut.utexas.edu> wrote:

 Subject: Re: [TenTec] Tri-Flo lubricant
 To: tentec at contesting.com
 Date: Friday, July 1, 2016, 5:24 PM
 
 One of the problems with suggesting
 other petroleum oils or greases, is 
 most will eventually dry out to a gummy and sticky mess in
 PTO use.
 
 Tri Flo has the ability to dissolve the dry, gummed up
 grease TT used, 
 and provide in addition, the Teflon lubrication as well,
 that will 
 remain after the oil has evaporated.  It won't seize up
 and stick the 
 moving parts.
 
 -Stuart
 K5KVH
 _______________________________________________
 TenTec mailing list
 TenTec at contesting.com
 http://lists.contesting.com/mailman/listinfo/tentec