[TenTec] Orion 2

[Gary Follett]

Check to see if you can control the sub receiver with the main receiver encoder by selecting VFO A to control receiver two.

If this works, most likely the cable from the sub receiver encoder shook loose in shipping.

Remove the 12 black flat head screws that hold the front panel assembly in place and you should be able to see in there to see if the cable is off.

Gary

W0DVN

Sent from my iPad

> On Mar 14, 2016, at 4:46 PM, <gyates at dreamscape.com> <gyates at dreamscape.com> wrote:
> 
> Good Morning,
> 
> 
> 
> I just got my Orion 2 back from repair and encoder for sub does not seem to
> work.  I can enter frequency directly and receiver works.  Any ideas of what
> I may be doing wrong or some magic button I have not pushed.
> 
> 
> 
> Thanks,
> 
> 
> 
> Greg
> 
> WB2BIN
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec