[TenTec] Oll & Digital Modes

[Steven KA9MOT]

All of the program operate natively from within Windows. I'm hung up on why
you're running these via a browser. Yes, I am aware that Chrome is a
browser.

So, while I know nothing about the OII, I was curious about your statement.

Steve KA9MOT
On Mar 28, 2016 12:20 PM, "Dwight Orten" <dwightorten at gmail.com> wrote:

> I don't really know about the Oll but with my Eagle, you have to switch the
> mic function to the accessory.  Very simple on the Eagle just hold down the
> mic button on front of radio till it switches, turn down the mic gain to a
> low level for my sound card and speech processor off.  All this happens in
> the ssb mode.
>
> Good luck, Dwight KM4FO
>
> On Mon, Mar 28, 2016 at 12:09 PM, P C Andy Anderson <xtraham58 at hotmail.com
> >
> wrote:
>
> > Hi Jim,  TT has a cable with the sound card in line model 712, so there
> is
> > no need to use the computer card. On one end is a USB connector and the
> > other end has the mating connector for the Oll  I/O jack.
> >
> > VOX on or off makes no difference. The only settings are the Tx audio
> > source, either Mic, aux or both. Works with it set at aux. The only other
> > setting is the Aux input gain, currently set at 50???.
> > Maybe something else on the Oll that I have not found yet, that is why I
> > am asking here.
> >
> > Tnx for your suggestions.
> >
> > Andy, W3LI
> >
> > ________________________________________
> >
> >
> >
> > Hi Andy,
> >
> > I don't know the Orion II, but you must put any rig into TX mode. This
> > can be done either via some form of PTT or VOX.  Some rigs will take
> > audio from a Line Input (like the USB audio unit) and some do not. My K3
> > DOES let the Line Input activate VOX. So did the FT1000MP that I sold
> > about 8 years ago.
> >
> > If you ARE using VOX, check the VOX sensitivity -- you may need to
> > either increase the VOX sensitivity or increase the audio output of the
> > computer sound card.
> >
> > VOX has always worked very well for me for all digital modes. I work a
> > lot of RTTY for contesting and DX chasing, and the various WSJT modes on
> > 6M and 160M.
> >
> > Another thing that can prevent keying with RTTY (not not the other
> > digital modes) is the RTTY settings (Baud rate, RTTY tone frequencies)
> > must be the same on both computer and rig.
> >
> > Another thing that has bitten me in MMTTY is that every time you change
> > the decode algorithm, it pulls in the default settings from a config
> > file. So you may make a change, then change the decode setting, and
> > overwrite the change you made. I don't know the other programs you
> > tried, but they may have their own bear traps.
> >
> > This analysis of USB sound cards includes very detailed, step by step
> > procedures for setting audio levels for digital modes.
> > http://k9yc.com/USB_Interfaces.pdf
> >
> > 73, Jim K9YC
> >
> >   On Mon,3/28/2016 9:32 AM, P C Andy Anderson wrote:
> > > Any help would be appreciated. TNX
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>