[TenTec] Oll & Digital Modes

[P C Andy Anderson]

Howdy, Tnx Tony for the info and numbers.

Maybe we can hook up on PSK. We do not have to wait for the net.

Andy, W3LI

Hi to MRS MXT
________________________________________


Andy,

Here is a link for FLDIGI.
https://sourceforge.net/directory/os:windows/?q=fldigi  You have to pick the
download for Windoze.  You know that I use a small speaker and mike into my
computers' soundcard which works very well and use VOX to key the my
ORION-II.  I assume that the Auxiliary mike input will also work on the VOX
but I am not sure.
One important thing  for setting the VOX parameters, is that when you press
the menu button then the VOX button you have the three options.  I
discovered (ask me how I found out) that the VOX level is the most sensitive
at a low % level.  Contrary to my way of thinking increasing the % level
will DECREASE the VOX sensitivity.  Here are my settings (for the Mike
input).

VOX Trip Level:  1%
Anti-Vox Level    20%
Vox Hang              0.40 seconds.

Hope that helps.
73, Tony VE3DWI.

----- Original Message -----
From: "P C Andy Anderson" <xtraham58 at hotmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Monday, March 28, 2016 1:40 PM
Subject: Re: [TenTec] Oll & Digital Modes


> Tnx Dwight, yes the Oll is about the same only done through a menu item as
> mentioned. The choices are Mic, Aux, or Both. Just select Aux when using
> the Aux I/O connecter on the back of the rig. The TT 712 cable connects
> the rig to the computer. I am familiar with the Eagle, great radio.
> Tnx agn, Andy, W3LI
>
> ________________________________________
>
>
> I don't really know about the Oll but with my Eagle, you have to switch
> the
> mic function to the accessory.  Very simple on the Eagle just hold down
> the
> mic button on front of radio till it switches, turn down the mic gain to a
> low level for my sound card and speech processor off.  All this happens in
> the ssb mode.
>
> Good luck, Dwight KM4FO
>
> On Mon, Mar 28, 2016 at 12:09 PM, P C Andy Anderson
> <xtraham58 at hotmail.com>
> wrote:
>
>> Hi Jim,  TT has a cable with the sound card in line model 712, so there
>> is
>> no need to use the computer card. On one end is a USB connector and the
>> other end has the mating connector for the Oll  I/O jack.
>>
>> VOX on or off makes no difference. The only settings are the Tx audio
>> source, either Mic, aux or both. Works with it set at aux. The only other
>> setting is the Aux input gain, currently set at 50???.
>> Maybe something else on the Oll that I have not found yet, that is why I
>> am asking here.
>>
>> Tnx for your suggestions.
>>
>> Andy, W3LI
>>
>> ________________________________________
>>
>>
>>
>> Hi Andy,
>>
>> I don't know the Orion II, but you must put any rig into TX mode. This
>> can be done either via some form of PTT or VOX.  Some rigs will take
>> audio from a Line Input (like the USB audio unit) and some do not. My K3
>> DOES let the Line Input activate VOX. So did the FT1000MP that I sold
>> about 8 years ago.
>>
>> If you ARE using VOX, check the VOX sensitivity -- you may need to
>> either increase the VOX sensitivity or increase the audio output of the
>> computer sound card.
>>
>> VOX has always worked very well for me for all digital modes. I work a
>> lot of RTTY for contesting and DX chasing, and the various WSJT modes on
>> 6M and 160M.
>>
>> Another thing that can prevent keying with RTTY (not not the other
>> digital modes) is the RTTY settings (Baud rate, RTTY tone frequencies)
>> must be the same on both computer and rig.
>>
>> Another thing that has bitten me in MMTTY is that every time you change
>> the decode algorithm, it pulls in the default settings from a config
>> file. So you may make a change, then change the decode setting, and
>> overwrite the change you made. I don't know the other programs you
>> tried, but they may have their own bear traps.
>>
>> This analysis of USB sound cards includes very detailed, step by step
>> procedures for setting audio levels for digital modes.
>> http://k9yc.com/USB_Interfaces.pdf
>>
>> 73, Jim K9YC
>>
>>   On Mon,3/28/2016 9:32 AM, P C Andy Anderson wrote:
>> > Any help would be appreciated. TNX
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec