[TenTec] Orion 565 XMIT alignment

[art N4UC]

Thanks a lot Mike, that answers the ALC aspect of the question. Just for clarification though, you say to set the ALC SET to where the actual RF output as measured by an external wattmeter is about 110% of the pwr setting on the front panel. In this case you're looking for 110W on the external meter, correct?  Is the number on the front panel (100 in this case) supposed to represent power output in watts or percentage of maximum output? Is this possibly where the PWR pot comes into play, to adjust power output reading on the analog meter?


________________________________
From: TenTec <tentec-bounces at contesting.com> on behalf of Mike Schatzberg <cherokeehillfarm at earthlink.net>
Sent: Saturday, November 5, 2016 7:11 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Orion 565 XMIT alignment

Take a look on my page.  It was written for the 566 and may help.


http://home.earthlink.net/~cherokeehillfarm/id2.html
[http://home.earthlink.net/~cherokeehillfarm/sitebuildercontent/sitebuilderpictures/mvc-018f.jpg]<http://home.earthlink.net/~cherokeehillfarm/id2.html>

AMATEUR RADIO STATION W2AJI - EarthLink<http://home.earthlink.net/~cherokeehillfarm/id2.html>
home.earthlink.net
Welcome to W2AJI, Tryon, North Carolina. First licensed in 1961, this year marks 50 years of continuous operation of W2AJI. Mike has been associated with the wire ...



73,

Mike
W2AJI

Sent from my iPhone

> On Nov 5, 2016, at 1:46 AM, art N4UC <n4uc at hotmail.com> wrote:
>
> Does anyone have the procedure to set the PWR, ALC, REF, etc... pots on the A5 board?
>
> Thanks in advance, 73
>
> Art N4UC
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
TenTec Info Page - Contesting<http://lists.contesting.com/mailman/listinfo/tentec>
lists.contesting.com
Welcome to the Ten-Tec mailing list! This list is intended for the exchange of information on Ten-Tec-related topics ONLY. Off Topic subject postings should be ...


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
TenTec Info Page - Contesting<http://lists.contesting.com/mailman/listinfo/tentec>
lists.contesting.com
Welcome to the Ten-Tec mailing list! This list is intended for the exchange of information on Ten-Tec-related topics ONLY. Off Topic subject postings should be ...