[TenTec] Paragon is it dead?
Lee
lee at wa3fiy.com
Sun Sep 11 15:12:44 EDT 2016
Louis, from your description of the problem, I don't think this is the
issue but I send this link to you for reference.
http://tentecwiki.org/doku.php?id=585disp
Hope you find the culprit. The Paragon is a nice radio.
73,
-Lee-
WA3FIY
------ Original Message ------
From: "Louis Ciotti" <lciotti1 at gmail.com>
To: tentec at contesting.com
Sent: 9/11/2016 10:25:22 AM
Subject: Re: [TenTec] Paragon is it dead?
>Well I am still stuck here. I have double checked all the connections
>that
>I could have possibly touched, and everything is correct. At this
>point
>upon power up I do get a quiet hiss out of the speaker, so it is at
>least
>partially working. The display typically is blank, and none of the
>buttons
>work... (i.e. I push them and no LEDs light and I do not hear a
>beep)... 0
>
>On Sat, Sep 10, 2016 at 4:34 PM, Louis Ciotti <lciotti1 at gmail.com>
>wrote:
>
>> OK so I thought I was making good progress resurrecting a paragon,
>>but now
>> I thing it may be "brain dead" . It worked the last time I had it on
>>the
>> bench, but now when that I have time to finish getting it back
>>together,
>> when I turn it on all I get is random LEDs lit up, nothing and
>>nothing on
>> the display, and no audio output. The last time it was on the bench
>> everything worked, just needed to fix the headphone jack...
>>
>> Did the processor or memory die? Any thoughts on debugging this?
>>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list