[TenTec] N1 and N2 slots

[Stan Gammons]

Looks like I misread, again.  The later Omni VI and Omni VI+ had 3 - 9 
Mhz IF filter slots?  Must have SMT components on that 9 Mhz IF board. I 
don't see how one could put 3 filters on that board otherwise.  The Omni 
VI I have only has 2, so I guess there is no N1 and N2.


73

Stan
KM4HQE


On 08/12/2017 10:57 PM, Stan Gammons wrote:
> On 08/12/2017 09:37 PM, Ken Brown wrote:
>
>> If you have a Omni VI+ or a later Omni VI that was upgraded it will have
>> two optional narrow 9 MHz IF filter slots, which are selected by the 
>> N1 and
>> N2 buttons. You can use one or the other, or none, but not both. 
>> Again the
>> 2.4 kHz "non-option" filter is always in use for both TX and RX..
>
> Hi Ken,
>
> It has the 9 Mhz IF board with 2 filter positions.  One has a 2.4 Khz 
> filter and the position maked optional has no filter.  N1 and N2 
> buttons?  There are no buttons on the front panel marked N1 and N2. 
> So, I'm kind of lost...
>
>
> 73
>
> Stan
> KM4HQE
>