[TenTec] TenTec Digest, Vol 170, Issue 6
Barry N1EU
barry.n1eu at gmail.com
Mon Feb 6 14:31:42 EST 2017
I think the crimp tool is very expensive but you really don't need it.
Solder the center conductor and lightly crimp the shield near the top
(above the level of insertion into the TMP jack) using diagonal cutting
pliers etc. You can solder the shield after crimping like this as well.
Barry N1EU
On Mon, Feb 6, 2017 at 2:17 PM, Fred <n8yx at neo.rr.com> wrote:
>
> Anyone know which crimp tool is used with the TMP series connectors and
> where to get them?
>
> On 2/6/2017 12:00 PM, tentec-request at contesting.com wrote:
>
>> 3. Re: Interstage coax cable w/ THP male connectors wanted
>> (Barry N1EU)
>>
>>
>> ----------------------------------------------------------------------
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Mon, 6 Feb 2017 09:54:06 -0500
>> From: Barry N1EU <barry.n1eu at gmail.com>
>> To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
>> Subject: Re: [TenTec] Interstage coax cable w/ THP male connectors
>> wanted
>> Message-ID:
>> <CAFmfzDvNvP+DXL7eaCc_o4kJyba=5cAqMNxzKLkLT0t3hibeHw at mail.gm
>> ail.com>
>> Content-Type: text/plain; charset=UTF-8
>>
>> fwiw, TMP connectors are available for do-it-yourself at
>> https://www.therfc.com/taiko.htm
>>
>> Barry N1EU
>>
>> On Mon, Feb 6, 2017 at 8:32 AM, David Perrin <dbperrin at gmail.com> wrote:
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
More information about the TenTec
mailing list