[TenTec] Need Orion I Firmware

[Carl Moreschi]

Rick,

I don't have that firmware.  But I do not believe changing the FW will 
fix the problem.  I believe that problem comes and goes with temperature 
variations.

The fix is to get a filter to connect to the output of the Orion between 
the Orion and Acom.  I researched this last year and found a filter. 
But I sold my Acom 1000 and now use a different amp.  So that fixed it 
for me.

I think Barry, N1EU,  has the info on the filter.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 1/24/2017 9:50 AM, rick at dj0ip.de wrote:
> We are trying to load firmware V3.025 onto an Orion 565.
>
> It has been running V3.032.
>
>
>
> The V3.032 runs OK when barefoot but when using an Acom amplifier, it causes
> the ARC FAULT problem with the amp.
>
>
>
> When the radio was running V3.025 in the past years, it worked OK.
>
> We would like to put the old firmware back onto the radio.
>
>
>
> We have downloaded the specific firmware from the RKR site
>
> (http://www.rkrdesignsllc.com/support/product-documentation/product-document
> ation/ten-tec-565-orion/ ) but it does not run.
>
>
>
> Other (older versions) downloaded there run OK but that specific version
> seems to be corrupt.
>
>
>
> Does anyone have this firmware or know of another site where we can download
> it?
>
>
>
> TNX
>
>
>
> 73
>
> Rick, DJ0IP
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>