[TenTec] notch filter for Eagle?

Bernie Skoch k5xs at aol.com
Thu Jul 20 21:07:02 EDT 2017 

It's a very nice feature if you are bring QRMd by a nearby carrier.  With a good working one you can notch the carrier out and not have to listen to it.

> On Jul 20, 2017, at 20:51, Rick Cochran via TenTec <tentec at contesting.com> wrote:
> 
> Well, use almost all CW on my OMNI VII.  I am not sure what the notch filter is.  Never used it.
> 
> I have a couple of Yaesu rigs and have no idea how to use notch.
> 
> Doesn't sound like a critical feature to me.
> 
> 73s,
> 
> WO8L 
> 
> 
> 
> Sent from my iPhone
> 
>> On Jul 20, 2017, at 8:22 PM, Carl Moreschi <n4py3 at earthlink.net> wrote:
>> 
>> I find the hardware noise blanker on my Orion works very well.  It's on a par with the Flex 6500 noise blanker system.
>> 
>> Carl Moreschi N4PY
>> 58 Hogwood Rd
>> Louisburg, NC 27549
>> www.n4py.com
>> 
>>> On 7/20/2017 8:18 PM, David W LeJeune, Sr wrote:
>>> Thanks, Rick.  I'd heard that Rob had a hand in it's improvement.  Had a friend who had one of the original Orion's and the noise blanker was almost worthless.  On my Orion II, the auto notch still causes distortion of the audio signal when in use.  Not sure if this is common.  Still use the Orion II on 80meter SSB and a lot on CW on all bands.  But the Flex 6500 is a lot better than my old Flex 5000 on CW.
>>> 
>>> Dave WN5V
>>> 
>>> -----Original Message-----
>>> From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of rick at dj0ip.de
>>> Sent: Thursday, July 20, 2017 4:55 PM
>>> To: 'Discussion of Ten-Tec Equipment'
>>> Subject: Re: [TenTec] notch filter for Eagle?
>>> 
>>> Dave,
>>> 
>>> That is only because Rob Sherwood worked long and hard on Ten-Tec and FLEX to fix their problems.  When they originally shipped, neither were any good at blanking electric fences.
>>> We all owe Rob a huge amount of gratitude for the many years of service he has given us.
>>> 
>>> 73
>>> Rick, DJ0IP
>>> 
>>> -----Original Message-----
>>> From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of David W LeJeune, Sr
>>> Sent: Thursday, July 20, 2017 9:48 PM
>>> To: 'Discussion of Ten-Tec Equipment'
>>> Subject: Re: [TenTec] notch filter for Eagle?
>>> 
>>> I have an electrical fence next door.  Both the noise blanker in my Orion II and the one in my Flex 6500 easily take out that type of noise as well as ignition noise.  The Orion has a manual notch filter (sort of).  It's really a fixed freq notch at either 300 hz or 1050 hz.  You can use that with CW and the RIT - move the interfering hetrodyne inside of the selected notch. Of course, you have to accept the change in the pitch of the CW signal.
>>> 
>>> Dave WN5V
>>> 
>>> -----Original Message-----
>>> From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of rick at dj0ip.de
>>> Sent: Thursday, July 20, 2017 9:36 AM
>>> To: 'Discussion of Ten-Tec Equipment'
>>> Subject: Re: [TenTec] notch filter for Eagle?
>>> 
>>> Gary,
>>> 
>>> Your Pro 2 of course is ancient history now.  Was a great radio in its day.
>>> Manual notch filters are fine on CW because "we" use our brain to notch the disturbance and not the desired frequency.  The auto-notch can't tell the difference.
>>> 
>>> Regardless of what it can and can't do, if it dies, you probably won't even get spare parts for it.  And brand new radios are no longer coming with manual notch filters (except for the old stock sitting on shelves and being offered at dumping prices to get rid of it).
>>> 
>>> If my memory serves me right, that was still one of the radios with a useful noise blanker for blanking out electrical fences.  None of the new DSP noise blankers can do that as well as the old noise blankers.
>>> 
>>> There certainly were advantages in the older radios but we will probably only see one more new radio come out in Japan with that old technology...at the end of this year.
>>> 
>>> I don't know if Mike will bring out an Eagle or Omni VII again.  The eagle has a good noise blanker, the OM7 has a DSP blanker, but it has been improved in firmware for use near electrical fences; still not as good as older technology though.
>>> 
>>> Ones step forward, two steps back! (hi)
>>> 
>>> 73
>>> Rick
>>> 
>>> 
>>> -----Original Message-----
>>> From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of Dukes HiFi
>>> Sent: Thursday, July 20, 2017 4:03 PM
>>> To: Discussion of Ten-Tec Equipment
>>> Cc: Bernie Skoch
>>> Subject: Re: [TenTec] notch filter for Eagle?
>>> 
>>> In side-by-side comparison, an Icon IC-756 Pro2 notch filter versus an Orion/Eagle type notch filter, using my Pro 2 manual notch filter (which also works in CW, and is inside the AGC loop), I can hear weak but desired signals far more easily with the otherwise inferior Pro 2 than I can with the otherwise superior Orion/Eagle. This is especially true when the offending carrier is keyed, since the Pro 2 receiver is not constantly adjusting gain to compensate for the keyed offending carrier.
>>> 
>>> One can SORT of obtain similar results by turning off the AGC in the Orion/Eagle when using the notch filter as long as you don’t need any AGC action.
>>> 
>>> Gary
>>> 
>>> 
>>> 
>>>> On Jul 20, 2017, at 8:34 AM, Bernie Skoch via TenTec<tentec at contesting.com>  wrote:
>>>> 
>>>> Rick,
>>>> 
>>>> I do not believe I am "out in right field."
>>>> 
>>>> Someone commented that all Ten Tec notch filters are useless.  I disagreed.
>>>> 
>>>> 73,
>>>> Bernie
>>>> 
>>>>> On Jul 20, 2017, at 02:30, rick at dj0ip.de<Rick at DJ0IP.de>  wrote:
>>>>> 
>>>>> You guys are all out in right field.
>>>>> 
>>>>> No radio's auto notch filter works in CW mode.
>>>>> They cannot distinguish between the useful tone and the disturbing tone.
>>>>> 
>>>>> And yes, in that case, a manual notch filter is indeed better, but
>>>>> show me a radio built today that has one.
>>>>> 
>>>>> I find the Eagle's notch filter effective on SSB.
>>>>> 
>>>>> 73
>>>>> Rick, DJ0IP
>>>>> 
>>>>> -----Original Message-----
>>>>> From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of
>>>>> Bernie Skoch via TenTec
>>>>> Sent: Thursday, July 20, 2017 3:21 AM
>>>>> To: Discussion of Ten-Tec Equipment
>>>>> Cc: Bernie Skoch; w2iy at verizon.net
>>>>> Subject: Re: [TenTec] notch filter for Eagle?
>>>>> 
>>>>> "It's sort of useless, like all Ten Tec notch filters..."
>>>>> 
>>>>> I _LOVE_ my Orion II notch filter!
>>>>> 
>>>>> The automatic feature is good, but the manual one is about the best
>>>>> I've ever used.
>>>>> 
>>>>> 73,
>>>>> Bernie
>>>>> 
>>>>>> On Jul 19, 2017, at 16:33, Gary F<dukeshifi at comcast.net>  wrote:
>>>>>> 
>>>>>> The Eagle does have a notch function. I don't recall how to activate
>>>>>> it
>>>>> but it is in the manual.
>>>>>> 
>>>>>> It's sort of useless, like all Ten Tec notch filters, since it is
>>>>>> outside
>>>>> the AGC loop, so, while it does not have the carrier, it also
>>>>> attenuated your desired signal by about as much as it reduces the carrier.
>>>>>> 
>>>>>> The reduction to 20 watts in Tune is self-defense. Orion's do it
>>>>>> too. This
>>>>> is to prevent the presence of full 100 watts into a mismatch. It is
>>>>> good policy.
>>>>>> 
>>>>>> Orion's had an option in which you could press the Power button, I
>>>>> believe, to get 100 watts in Tune after match had been reached.
>>>>>> 
>>>>>> Red arid green the A//B VFO, there really is no A or B VFO in the
>>>>> traditional sense and Eagle only has one tuning knob. Therefore, the
>>>>> A/B indicator serves no function in transceive operation. In split
>>>>> operation, that indicator should flip when going fro RX to TX to tell
>>>>> you which displayed frequency is the TX frequency.
>>>>>> 
>>>>>> Gary
>>>>>> 
>>>>>> Sent from my iPad
>>>>>> 
>>>>>>> On Jul 19, 2017, at 3:05 PM, Michael Tortorella<w2iy at verizon.net>  wrote:
>>>>>>> 
>>>>>>> Hi all, I am hearing an awful lot of steady carrier signals up here
>>>>>>> in
>>>>> the
>>>>>>> frozen north of Downeast Maine.   Most are not very strong and they go
>>>>> away
>>>>>>> when I disconnect the antenna so they are external to the radio.
>>>>>>> Today I am chasing TR8CA on 20 CW, he is way down in the noise, and
>>>>>>> 100 Hz away from one of these carriers.  Sure would be nice to have
>>>>>>> something like a notch filter to help in situations like these but
>>>>>>> I could not see anywhere in the manual or front panel where I could
>>>>>>> notch the offending carrier.  Is there any list wisdom on this?
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> On another note, I did contact service at TT last week with my
>>>>>>> question about power out in autotune; after only a few days delay I
>>>>>>> got an answer that the power out in autotune is 20 watts even
>>>>>>> though the power output shown on the display is 100.  This seems
>>>>>>> not quite right from a human factors point of view, maybe there can
>>>>>>> be a firmware fix?  Also, when exchanging VFOs, the A,B labels do
>>>>>>> not change even when the B vfo is in large type at the top of the
>>>>>>> display.  I find this confusing.  OK, I guess this turned into a
>>>>>>> longer letter about a couple of other things besides notch
>>>>>>> filtering, so please excuse my prolixity and thank for the BW.  Any
>>>>>>> suggestions
>>>>> appreciated.
>>>>>>> 
>>>>>>> Thanks and 73, Mike W2IY
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> ---
>>>>>>> This email has been checked for viruses by AVG.
>>>>>>> http://www.avg.com
>>>>>>> _______________________________________________
>>>>>>> TenTec mailing list
>>>>>>> TenTec at contesting.com
>>>>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>>> 
>>>>>> _______________________________________________
>>>>>> TenTec mailing list
>>>>>> TenTec at contesting.com
>>>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>> 
>>>>> _______________________________________________
>>>>> TenTec mailing list
>>>>> TenTec at contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>> 
>>>>> _______________________________________________
>>>>> TenTec mailing list
>>>>> TenTec at contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>> 
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> 
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> 
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> 
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> 
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> 
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

More information about the TenTec mailing list