[TenTec] notch filter for Eagle?

[Michael Tortorella]

Stuart,
Yes, grounding is a problem here as I can't find a good place on the laptop
to attach a ground wire.  At home I use a tower and it has plenty of good
grounding points. The Eagle seems to be pretty clean of itself, all the junk
goes away when i disconnect the antenna.
73
Mike

-----Original Message-----
From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of Stuart
Rohre
Sent: Friday, July 21, 2017 2:34 PM
To: tentec at contesting.com
Subject: Re: [TenTec] notch filter for Eagle?

As long as the Flex is not producing spurious signals to be picked up on 
its own receiver, turning off other computers and routers should work to 
eliminate computer noise.  The long term fix, is to fix the pin 1 
problems Paul posted about, lack of grounding to the computer case for 
the shields of incoming or outgoing cables.

I have used few Flex radios, but generally, they were pretty clean of 
self generated RFI.  Checking the shield integrity of interconnect 
cables and using ferrite cores are two things that help keep computers 
quiet.

Stuart Rohre
K5kVH
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


---
This email has been checked for viruses by AVG.
http://www.avg.com