[TenTec] Master Reset on power up

[Dan Thompson]

Here is how you replace the battery which will fix your problem.
http://tentecwiki.org/doku.php?id=565battery

73, Dan W4UH

Sent from my iPad

> On Mar 31, 2017, at 12:32 AM, Mike Schatzberg <cherokeehillfarm at earthlink.net> wrote:
> 
> Change the backup battery behind the front panel. 
> 
> 73,
> 
> Mike 
> W2AJI 
> 
> Sent from my iPhone
> 
>> On Mar 31, 2017, at 12:28 AM, Kevin Santine via TenTec <tentec at contesting.com> wrote:
>> 
>> My Orion 2 has worked flawlessly for many years. However very recently when 
>> the rig is powered up it goes into a master reset (displayed on the boot 
>> up  screen as if it were intentionally done). I reloaded the latest firmware 
>> as  well as actually performed a ram clear followed by a master reset. No 
>> help. The  rigs parameters can be reset up after boot up and it does work 
>> fine, however on  the next power up, the same thing occurs. Any Ideas???
>> 
>> Thanks,
>> 
>> Kevin - AE5QU
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec