[TenTec] Tentec 585.

[Ken Brown]

Start by opening it up and applying DeOxit to every connector. Unplug,
apply DeOxit, replug. Be careful there my be some connectors that can be
plugged back in offset by one or more pins, incorrectly.

DE N6KB

On Tue, Sep 5, 2017 at 3:57 AM, Robin Lentz <robinlentz1 at hotmail.com> wrote:

> Good morning.  I have a Tentec 585 which I have enjoyed using for years.
> In recent times it has developed a problem with the phase lock loop not
> wanting to lock.  At first I could leave the rig on for a few minutes and
> pll would lock.  Now I can run the rig all day and pll will not lock most
> of the time.  Any suggestions on how to cure this problem?  Thanks and 73
> de WA4NLF
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>