[TenTec] Fwd: Scout IF/Audio board

[ARDUJENSKI at aol.com]

I HAVE A LOCAL HAM TRYING TO HELP ME TROUBLESHOOT A WEAK AND AT TIMES  
GARBLED AdSIO ON MY TEN TEC SCOUT. THIS IS THE NOTE HW AENT ME,  I WAS  HOPING 
SOMEONE FAMILIAR WITH THE SCOUT WOULD COMMUNICATE DIRECTLY WITH DAVE  (K2ZU)
 
thanks....alan...kb7mbi
 
 
  
____________________________________
 From: k2zu at comcast.net
To: ardujenski at aol.com
Sent: 9/9/2017 10:15:08  A.M. Pacific Daylight Time
Subj: Scout IF/Audio board


The if/audio board #81646 is the board I referred to in our  phone contact. 
 The diagram is labeled 81646 and has 10 potentiometers  shown  doing 
various things and the board is a through hole board.   The board in your radio 
is marked 81646  SMD and only has 5  potentiometers on it and none are marked 
as to what they do.  I can’t  tell for sure but the IC’s on your board 
appear to be the same ones in the  diagram.  

Don’t want to adjust anything because I don’t know what  I might screw up.

The station I worked last night was W6K in  Oklahoma.  He was up and down 
and gave me a 4 and 2. I gave him a 5and 2  with about S7 noise. Mike gain at 
the 3 o’clock position.  Power  difference?  I’ll try the boom mike next 
and see what it sounds like and  let you know.=