[TenTec] KV read

[A R]

Rodney,

Both of my Centurions have meter faces that are marked like yours, except that the marking between .8 and 2.4 is "1.6" (not 16).

Does your meter with the mode swith in the Ep position not indicate ANY value? Or, are you having a problem determining the value with the needle indicating between marked (numeric) hash marks? Doing that (interpolation) is a pretty common requirement with analog meter movement scales/markings.

Let me know if you need help in determining the Ep value with the needle indicating between marked values.

Allen--W7GIF
----- Original Message -----
From: Rodney<mailto:w3krq at dejazzd.com>
To: TenTec at contesting.com<mailto:TenTec at contesting.com>
Sent: Tuesday, August 14, 2018 10:40 AM
Subject: [TenTec] KV read

The Centurion has a poor KV meter you have no way knowing what the high voltage is. The meter reads 0 .8 16 2.4 3.2 4.0

---
This email has been checked for viruses by AVG.
https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avg.com&data=02%7C01%7C%7C4556fe739cba4bc71c1f08d6020d1817%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636698652590259947&sdata=uPBp1mj8O8cyGJXhsilebKdhE%2FxdLVW0KNCyV9PphXg%3D&reserved=0
_______________________________________________
TenTec mailing list
TenTec at contesting.com
https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=02%7C01%7C%7C4556fe739cba4bc71c1f08d6020d1817%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636698652590259947&sdata=OAQlzGFgChZtG%2BWbUw04PZIWl388fxqy13pA8YTLipY%3D&reserved=0