[TenTec] Corsair II tuning

[Steve Hunt]

I don't see any error in the schematic. The output from the FET 
oscillator stage is taken from the crystal bank common line via L3 into 
balanced mixer U1, Pin 11.

Steve G3TXQ


On 26/08/2018 23:47, MadScientist wrote:
>
>
> One other error in the schematic is that the local oscillator is shown connected directly to the FET power supply line (regulated as well) and bypassed to ground via a 0.01 uF capacitor. This can’t work…
>
> Gary
> W0DVN
>
>
>