[TenTec] Mic Wiring

[Rick at dj0ip.de]

My 50+ year old Shure 444 also works great with my Eagle.
It worked fine with my Orion....
And several OM6's, OM5, and a few original OMNIs.

73,
Rick, DJ0IP
(Nr. Frankfurt, Germany)

-----Original Message-----
From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of Winston
Sent: 17 February 2018 23:16
To: k9yc at arrl.net; Discussion of Ten-Tec Equipment <tentec at contesting.com>
Subject: Re: [TenTec] Mic Wiring

The Omni C needs a Hi-Z mic. Shure 444 works great with the old Ten Tec
rigs. 
Winston K4CWQ

Sent from my iPhone

> On Feb 17, 2018, at 2:30 PM, Jim Brown <k9yc at audiosystemsgroup.com> wrote:
> 
>> On 2/17/2018 7:49 AM, Greg S via TenTec wrote:
>> I think the Omni C still had a high impedance mic input.... which means
your dynamic Midland mic probably won't have enough output to drive the mic
amplifier.
> 
> I used to own an Omni A that I bought new. Don't remember what mic I used,
but I'm pretty sure it was not a Ten Tec mic. I suspect that a low-Z mic has
a good chance of working. Wire it according to the manual and try it!
> 
> 73, Jim K9YC
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec